Regulation 4 The requirements relating to exhaust systems

(1)

Without prejudice to regulation 3, the requirements with which an exhaust system must comply for the purposes of section 1(1) of the Act are that the silencer comprised in the exhaust system must be—

(a)

clearly and indelibly marked in accordance with paragraphs 3.1 to 3.1.3 of Annex II to the Directive, or

(b)

clearly and indelibly marked “BS AU 193/T2”, “BS AU 193a: 1990/T2” or “BS AU 193a: 1990/T3” (being marks referred to in the British Standard Specifications indicating that certain requirements specified in those instruments are met).

(2)

As respects an exhaust system the requirements as to packaging, labelling and the provision of accompanying instructions which must be complied with for the purposes of section 1(1) of the Act are the requirements of Schedule 2 to these Regulations.

(3)

For the purposes of this regulation Annex II to the Directive has effect as if at the beginning of paragraph 3.1.1 there were inserted the words “the name,”.