OpenLegislation

Regulation 3 Interpretation

Original text. Later amendments are not shown.

In regulation 2—

(a)

in paragraph (1)—

(i)

for the definition of “gas oil” there shall be substituted—

  • ““gas oil” means any liquid petroleum product produced in a refinery of a kind used as fuel in motor vehicles propelled by diesel engines of which at least 85 per cent by volume, including distillation losses, is distilled at a temperature of 350°C, when it is tested by the method described in British Standard BS 2000: Part 123: 1985 (February 1985 revision), entitled “British Standard Methods of test for Petroleum and its products. Part 123. Distillation of Petroleum Products” which came into effect on 28th February 1985”; and

(ii)

the word “and” immediately following the definition of “gas oil” shall be omitted and after the definition of “motor fuel” there shall be added the following words—

  • ““motor vehicle” means a mechanically propelled vehicle intended or adapted for use on roads; and

  • “road”—

    1. (i)

      in England and Wales has the meaning given by s.192(1) of the Road Traffic Act 1988f1 (“the 1988 Act”);

    2. (ii)

      in Scotland has the meaning given by s.192(2) of the 1988 Act; and

    3. (iii)

      in Northern Ireland has the meaning given by Article 2(1) of the Road Traffic (Northern Ireland) Order 1981f2.”; and

(b)

paragraph (3) shall be omitted.

Annotations

Footnotes

f1

1988 c. 52.

f2

S.I. 1981/154 (N.I. 1).