# The Motor Vehicles (Tests) (Amendment) (No. 2) Regulations 1983, Regulation 7


In Part VI of Schedule 3, in paragraph 9, for sub-paragraphs (c) to (e) substitute the following sub-paragraphs:—
“(c) any tyre has—
(i) a cut in excess of 25 millimetres or 10 per cent of the section width of the tyre, whichever is the greater, measured in any direction on the outside of the tyre and deep enough to reach the ply or cord,
(ii) a lump, bulge or tear caused by separation or partial failure of its structure, or
(iii) any portion of the ply or cord exposed;
(d) the base of any groove which showed in the original tread pattern of the tyre is not clearly visible;
(e) except in the case of a motorcycle with an engine capacity which does not exceed 50 cubic centimetres, either—
(i) the grooves of the tread pattern of the tyre do not have a depth of at least 1 millimetre throughout a continuous band measuring at least three-quarters of the breadth of the tread and round the entire outer circumference of the tyre; or—
(ii) in a case where the original tread pattern of the tyre did not extend beyond three-quarters of the breadth of the tread the base of any groove which showed in the original tread pattern does not have a depth of at least 1 millimetre;”.

---
Source: https://www.legislation.gov.uk/uksi/1983/1434/regulation/7 (the official version)
Page: https://openlegislation.uk/motor-vehicles-tests-amendment-no-2-regulations-1983/regulation-7
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.