# The Motor Vehicles (Type Approval) (Great Britain) (Amendment) (No. 3) Regulations 1992, Schedule 2: PROVISIONS TO BE INSERTED AFTER THE TABLE IN SCHEDULE 1 TO THE PRINCIPAL REGULATIONS


“PART II
LOW VOLUME TYPE APPROVAL VEHICLES
INTERIOR FITTINGS
1 The vehicle must comply with the design and construction requirements specified in—
(a) Annex I, paragraph 5 (excluding sub-paragraphs 5.1.2, 5.2.4, 5.3.4.1, 5.4.2.2, 5.7.1.2 and with the omission of the second sentence in 5.2.3.1) of Council Directive 74/60/EEC of 17th December 1973 as corrected on 6th August 1974 and 25th February 1977 and amended by Commission Directive 78/632/EEC of 19th May 1978; or
(b) paragraph 5 (excluding sub-paragraphs 5.1.2, 5.2.3.1, 5.2.4, 5.3.4.1, 5.4.2.2, 5.4.2.3, and 5.7.1.2) of ECE Regulation 21 as revised on 8th October 1980, amended on 26th April 1986 and corrected on 10th October 1986.
2 The vehicle must also be constructed so that the metal wires which stretch the lining of the roof and the frames of the sun visors have a maximum diameter of 5mm.”

---
Source: https://www.legislation.gov.uk/uksi/1992/2908/schedule/2 (the official version)
Page: https://openlegislation.uk/motor-vehicles-type-approval-great-britain-amendment-no-3-regulations-1992/schedule-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.