# The Motor Vehicles Tyres (Safety) (Amendment) Regulations 1993, Regulation 3


In regulation 2(3) before the definition of “designated approval mark” there shall be inserted the following definitions—
““BS AU 144b: 1977” means British Standard Automobile Series: Specification for retreaded car and commercial vehicle tyres published by the British Standards Institution under reference BS AU 144b: 1977 on 29th July 1977;
“BS AU 144c: 1988” means British Standard Automobile Series: Specification for retreaded car and commercial vehicle tyres published by the British Standards Institution under reference BS AU 144c: 1988 on 30th September 1988;
“BS AU 144d: 1988” means BS AU 144c: 1988 as amended by Amendment No. 1 (reference AMD 6592) published on 31st August 1990;
“BS AU 144e: 1988” means BS AU 144c: 1988 as amended by Amendment No. 1 (reference AMD 6592) published on 31st August 1990 and by Amendment No. 2 (reference AMD 7506) published on 15th December 1992;”.

---
Source: https://www.legislation.gov.uk/uksi/1993/2877/regulation/3 (the official version)
Page: https://openlegislation.uk/motor-vehicles-tyres-safety-amendment-regulations-1993/regulation-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.