# The Natural Mineral Water, Spring Water and Bottled Drinking Water (Amendment) (England) Regulations 2003, Regulation 21: Amendments to the Natural Mineral Water, Spring Water and Bottled Drinking Water Regulations 1999


For Table D in Part II of Schedule 3, there shall be substituted the following provisions—
“
TABLE D
Column 1
Column 2
Column 3
Column 4
Item
Parameters
Units of Measurement
Maximum Concentration
Note 1: The maximum concentration specified applies to the sum of the concentrations of the specified parameters.
Note 2: The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water.
1.
Boron
mg B/l
1.0
2.
Benzo (a) pyrene
μg/l
0.010
3.
Tetrachloroethene and Trichloroethene
μg/l
10 (note 1)
4.
Tetrachloromethane
μg/l
3
5.
Benzene
μg/l
1.0
6.
1,2-dichloroethane
μg/l
3.0
7.
Trichloromethane, Dichlorobromomethane, Dibromochloromethane and Tribromomethane
μg/l
100 (note 1)
8.
Epichlorohydrin
μg/l
0.10 (note 2)
9.
Vinyl chloride
μg/l
0.50 (note 2)
10.
Acrylamide
μg/l
0.10 (note 2)
”.

---
Source: https://www.legislation.gov.uk/uksi/2003/666/regulation/21 (the official version)
Page: https://openlegislation.uk/natural-mineral-water-spring-water-and-bottled-drinking-water-amendment-england-regulations-2003/regulation-21
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.