# The Natural Mineral Water, Spring Water and Bottled Drinking Water (England) Regulations 2007, Minimum performance characteristics for a method of analysis


Parameters
Uncertainty of measurement - percentage of the parametric concentration
Other requirements relating to the uncertainty of measurement
Other requirements
Aluminium
25
Ammonium
40
Chloride
15
Conductivity
20
Iron
30
Manganese
30
Oxidisability
50
Sodium
15
Sulphate
15
Total organic carbon
30
The uncertainty of measurement must be estimated at the level of 3 mg/l of the total organic carbon.
BS EN 1484: 1997 entitled “Water analysis —Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)” (ISBN 0 580 28372 0) published by the BSI on 15th October 1997 must be used.
Turbidity
30
The uncertainty of measurement must be estimated at the level of 1.0 nephelometric turbidity unit in accordance with BS EN ISO 7027-1:2016 entitled “Water quality — Determination of turbidity. Part 1: Quantitative methods (ISO 7027-1: 2016)” (ISBN 978 0 580 81961 2) published by the BSI on 31st July 2016.

---
Source: https://www.legislation.gov.uk/uksi/2007/2785/schedule/12/part/9/crossheading/minimum-performance-characteristics-for-a-method-of-analysis (the official version)
Page: https://openlegislation.uk/natural-mineral-water-spring-water-and-bottled-drinking-water-england-regulations-2007/schedule-12/part-9/crossheading-minimum-performance-characteristics-for-a-method-of-analysis
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

