{
  "url": "https://openlegislation.uk/natural-mineral-water-spring-water-and-bottled-drinking-water-wales-regulations-2007/schedule-2/part-2",
  "json_url": "https://openlegislation.uk/natural-mineral-water-spring-water-and-bottled-drinking-water-wales-regulations-2007/schedule-2/part-2.json",
  "legislation": "wsi/2007/3165",
  "legislation_title": "The Natural Mineral Water, Spring Water and Bottled Drinking Water (Wales) Regulations 2007",
  "legislation_url": "https://openlegislation.uk/natural-mineral-water-spring-water-and-bottled-drinking-water-wales-regulations-2007",
  "path": "schedule/2/part/2",
  "kind": "part",
  "number": "2",
  "heading": "Prescribed concentrations or values",
  "text": "Table A\nColumn 1\nColumn 2\nColumn 3\nColumn 4\nItem\nParameters\nUnits of Measurement\nConcentration or Value (maximum unless otherwise stated)\nNotes:\n3. The concentration (mg/l) of nitrate divided by 50 added to the concentration (mg/l) of nitrite divided by 3 must not exceed 1.\n4. Excluding tritium, potassium-40, radon and radon decay products.\n1.\nColour\nmg/1 Pt/Co scale\n20\n2.\nTurbidity\nNTU\n4\n3.\nOdour\nDilution number\n3 at 25°C\n4.\nTaste\nDilution number\n3 at 25°C\n5.\nSulphate\nmg SO4/1\n250\n6.\nSodium\nmg Na/l\n200\n7.\nNitrate\nmg NO3/l\n50 (note 1)\n8.\nNitrite\nmg NO2/l\n0.5 (note 1)\n9.\nAluminium\nμgAl/l\n200\n10.\nCopper\nmg Cu/l\n2\n11.\nFluoride\nmg F/l\n1.5\n12.\nHydrogen ion concentration\npH units\n4.5 (minimum)\n9.5 (maximum)\n13.\nTritium (for radioactivity)\nBq/l\n100\n14.\nTotal indicative dose\nmSv/year\n0.10 (note 2)\n15.\nManganese\nμg Mn/l\n50\nTable B\nColumn 1\nColumn 2\nColumn 3\nColumn 4\nItem\nParameters\nUnits of Measurement\nMaximum Concentration\nNotes:\n1. “Pesticides” means:\norganic insecticides,\norganic herbicides,\norganic fungicides,\norganic nematocides,\norganic acaricides,\norganic algicides,\norganic rodenticides,\norganic slimicides, and\nrelated products (inter alia, growth regulators) and their relevant metabolites, degradation and reaction products.\nOnly those pesticides which are likely to be present in a given water need to be monitored.\n2. The maximum concentration applies to each individual pesticide. In the case of aldrin, dieldrin, heptaclor and heptachlor epoxide the maximum concentration is 0.030 μg/l.\n3. The maximum concentration for “total substances” refers to the sum of the concentrations of all individual pesticides detected and quantified in the monitoring procedure.\n4. The specified compounds are benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, indeno(1.2,3-cd) pyrene.\n1.\nArsenic\nμg As/l\n10\n2.\nCadmium\nμg Cd/l\n5\n3.\nCyanide\nμg CN/l\n50\n4.\nChromium\nμg Cr/l\n50\n5.\nMercury\nμg Hg/l\n1\n6.\nNickel\nμg Ni/l\n20\n7.\nSelenium\nμg Se/l\n10\n8.\nAntimony\nμg Sb/l\n5\n9.\nLead\nμg Pb/l\n10\n10.\nPesticides and related products:\n— individual substances\nμg/l\n0.10 (notes 1 and 2)\n— total substances\nμg/l\n0.50 (notes 1 and 3)\n11.\nPolycyclic aromatic Hydrocarbons\nμg/l\n0.1 sum of concentrations of specified compounds (note 4)\n12.\nBromate\nμg BrO3/l\n10\nTable C\nColumn 1\nColumn 2\nColumn 3\nColumn 4\nItem\nParameters\nUnits of Measurement\nMaximum Concentration\nNotes:\n1. The total viable colony count should be measured within 12 hours of bottling, with the sample water being kept at a constant temperature during that 12 hour period. Any increase in the total viable colony count of the water between 12 hours after bottling and the time of sale should not be greater than that normally expected.\n2. In 72 hours on agar-agar or an agar-gelatine mixture.\n3. In 24 hours on agar-agar.\n1.\nEscherichia coli(E.coli)\nnumber/250 ml\n0/250 ml\n2.\nEnterococci\nnumber/250 ml\n0/250 ml\n3.\nColony count 22°C\nnumber/ml\n100/ml (notes 1 and 2)\n4.\nColony count 37°C\nnumber/ml\n20/ml (notes 1 and 3)\n5.\nPseudomonas aeruginosa\nnumber/250ml\n0/250 ml\nTable D\nColumn 1\nColumn 2\nColumn 3\nColumn 4\nItem\nParameters\nUnits of Measurement\nMaximum Concentration\nNotes:\n1. The maximum concentration specified applies to the sum of the concentrations of the specified parameters.\n2. The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water.\n1.\nBoron\nmg/l\n1.0\n2.\nBenzo (a) pyrene\nμg/l\n0.010\n3.\nTetrachloroethene and Trichloroethene\nμg/l\n10 (note 1)\n4.\nTetrachloromethane\nμg/l\n3\n5.\nBenzene\nμg/l\n1.0\n6.\n1,2-dichloroethane\nμg/l\n3.0\n7.\nTrichloromethane, Dichlororbromomethane, Dibromochloromethane and Tribromomethane\nμg/l\n100 (note 1)\n8.\nEpichlorohydrin\nμg/l\n0.10 (note 2)\n9.\nVinyl chloride\nμg/l\n0.50 (note 2)\n10.\nAcrylamide\nμg/l\n0.10 (note 2)",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [
    {
      "type": "substituted",
      "affecting": "wsi/2009/1897",
      "affecting_title": "The Natural Mineral Water, Spring Water and Bottled Drinking Water (Wales) (Amendment) Regulations 2009"
    },
    {
      "type": "substituted",
      "affecting": "wsi/2009/1897",
      "affecting_title": "The Natural Mineral Water, Spring Water and Bottled Drinking Water (Wales) (Amendment) Regulations 2009"
    },
    {
      "type": "substituted",
      "affecting": "wsi/2009/1897",
      "affecting_title": "The Natural Mineral Water, Spring Water and Bottled Drinking Water (Wales) (Amendment) Regulations 2009"
    }
  ],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/wsi/2007/3165/schedule/2/part/2",
    "retrieved_at": "2026-10-28T23:59:51.016992+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}