# The Natural Mineral Water, Spring Water and Bottled Drinking Water (Wales) Regulations 2015, Part 2: Methods of analysis and performance characteristics


Table 1
Prescribed methods of analysis
1 Use the following method to make m-CP agar:
Parameter
Method
Clostridium perfringens (including spores)
Membrane filtration followed by anaerobic incubation of the membrane on m-CP agar1 at 44 ±1ºC for 21± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds.
Coliform bacteria
BS-EN ISO 9308-1
Colony count 22ºC – enumeration of culturable microorganisms
BS-EN ISO 6222
Colony count 37ºC – enumeration of culturable microorganisms
BS-EN ISO 6222
Enterococci
BS-EN ISO 7899-2
Escherichia coli (E. Coli)
BS-EN ISO 9308-1
Pseudomonas aeruginosa
BS-EN ISO 12780
Make a basal medium consisting of—
Tryptose
30.0g
Yeast extract
20.0g
Sucrose
5.0g
L-cysteine hydrochloride
1.0g
MgSO4.7H2O
0.1g
Bromocresol purple
40.0mg
Agar
15.0g
Water
1,000.0ml
Dissolve the ingredients of basal medium, adjust pH to 7.6 and autoclave at 121ºC for 15 minutes. Allow the medium to cool.
Dissolve—
D-cycloserine
400.0mg
Polymyxine-B sulphate
25.0mg
Indoxl-β-D-glucoside
60.0mg
into 8ml sterile water and add it to the medium.
Add to the medium—
Filter-sterilised 0.5% phenolphthalein diphosphate solution
20.0ml
Filter-sterilised 4.5% FeCl3.6H2O
2.0ml
Table 2
Prescribed performance characteristics for methods of analysis
1 The method of analysis should determine total cyanide in all forms.
2 Oxidation should be carried out for 10 minutes at 100°C under acid conditions using permanganate.
3 The performance characteristics apply to each individual pesticide and will depend on the pesticide concerned.
4 The performance characteristics apply to the individual substances specified at 25% of the parametric value in Table B in Part 2, Schedule 7.
5 The performance characteristics apply to the individual substance specified at 50% of the parametric value in Table B in Part 2, Schedule 7.
Parameters
Trueness % of prescribed concentration or value or specification
Precision % of prescribed concentration or value or specification
Limit of detection % of prescribed concentration or value or specification
Aluminium
10
10
10
Ammonium
10
10
10
Antimony
25
25
25
Arsenic
10
10
10
Benzene
25
25
25
Benzo(a)pyrene
25
25
25
Boron
10
10
10
Bromate
25
25
25
Cadmium
10
10
10
Chloride
10
10
10
Chromium
10
10
10
Conductivity
10
10
10
Copper
10
10
10
Cyanide1
10
10
10
1,2-dichloroethane
25
25
10
Fluoride
10
10
10
Iron
10
10
10
Lead
10
10
10
Manganese
10
10
10
Mercury
20
10
20
Nickel
10
10
10
Nitrate
10
10
10
Nititre
10
10
10
Oxidisability2
25
25
10
Pesticides and related products3
25
25
25
Polycyclic aromatic hydrocarbons4
25
25
25
Selenium
10
10
10
Sodium
10
10
10
Sulphate
10
10
10
Tetrachloroethene5
25
25
10
Trichloroethene5
25
25
10
Trihalomethanes4
25
25
10

---
Source: https://www.legislation.gov.uk/wsi/2015/1867/schedule/10/part/2 (the official version)
Page: https://openlegislation.uk/natural-mineral-water-spring-water-and-bottled-drinking-water-wales-regulations-2015/schedule-10/part-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

