# The Natural Mineral Water, Spring Water and Bottled Drinking Water (Wales) Regulations 2015, Part 2: Parametric values for microbiological and chemical parameters


Table A: Microbiological Parameters
1 The total viable colony count should be measured within 12 hours of bottling, with the sample water being kept at a constant temperature during that 12 hour period. Any increase in the total viable colony count of the water between 12 hours after bottling and the time of sale should not be greater than that normally expected.
2 In 72 hours on agar-agar or an agar-gelatine mixture.
3 In 24 hours on agar-agar.
Item
Parameter
Units of Measurement
Maximum Concentration or Value
1.
Escherichia coli
(E coli)
number/250 ml
0/250 ml
2.
Enterococci
number/250 ml
0/250 ml
3.
Pseudomonas aeruginosa
number/250ml
0/250 ml
4.
Colony count 22ºC
number/ml
100/ml 12
5.
Colony count 37ºC
number/ml
20/ml13
Table B: Chemical Parameters
1 The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water.
2 The concentration (mg/l) of nitrate divided by 50 added to the concentration (mg/l) of nitrite divided by 3 must not exceed 1.
3 “Pesticides” means:
– organic insecticides,
– organic herbicides,
– organic fungicides,
– organic nematocides,
– organic acaricides,
– organic algicides,
– organic rodenticides,
– organic slimicides, and
– related products (inter alia, growth regulators) and their relevant metabolites, degradation and reaction products.
Only those pesticides which are likely to be present in a given water need to be monitored.
4 The maximum concentration applies to each individual pesticide. In the case of aldrin, dieldrin, heptachlor and heptachlor epoxide the maximum concentration is 0.030 µg/l.
5 The maximum concentration for “total substances” refers to the sum of the concentrations of all individual pesticides detected and quantified in the monitoring procedure.
6 The specified compounds are benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, indeno(1,2,3-cd)pyrene.
7 The maximum concentration specified applies to the sum of the concentrations of the specified parameters.
Item
Parameter
Units of Measurement
Maximum Concentration or Value
1.
Acrylamide
µg/l
0.10 1
2.
Antimony
µg Sb/l
5
3.
Arsenic
µg As/l
10
4.
Benzene
µg/l
1.0
5.
Benzo (a) pyrene
µg/l
0.010
6.
Boron
mg/l
1.0
7.
Bromate
µg/l BrO3/l
10
8.
Cadmium
µg Cd/l
5
9.
Chromium
µg Cr/l
50
10.
Copper
mg Cu/l
2
11.
Cyanide
µg CN/l
50
12.
1,2-dichloroethane
µg/l
3.0
13.
Epicholorohydrin
µg/l
0.10 1
14.
Fluoride
mg F/l
1.5
15.
Lead
µg Pb/l
10
16.
Mercury
µg Hg/l
1
17.
Nickel
µg Ni/l
20
18.
Nitrate
mg NO3/l
50 2
19.
Nitrite
mg NO2/l
0.5 2
20.
Pesticides and related products:
- individual substances
µg/l
0.10 34
- total substances
µg/l
0.50 35
21.
Polycyclic aromatic hydrocarbons
µg/l
0.1 sum of concentrations of specified compounds 6
22.
Selenium
µg Se/l
10
23.
Tetrachloroethene and Trichloroethene
µg/l
10 7
24.
Trichloromethane,
Dicholrorbromomethane, Dibromocholromethane and Tribromomethane
µg/l
100 7
25.
Vinyl chloride
µg/l
0.50 1

---
Source: https://www.legislation.gov.uk/wsi/2015/1867/schedule/7/part/2 (the official version)
Page: https://openlegislation.uk/natural-mineral-water-spring-water-and-bottled-drinking-water-wales-regulations-2015/schedule-7/part-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

