{
  "url": "https://openlegislation.uk/noise-emission-in-the-environment-by-equipment-for-use-outdoors-regulations-2001/schedule-6/part-A/paragraph-5",
  "json_url": "https://openlegislation.uk/noise-emission-in-the-environment-by-equipment-for-use-outdoors-regulations-2001/schedule-6/part-A/paragraph-5.json",
  "legislation": "uksi/2001/1701",
  "legislation_title": "The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001",
  "legislation_url": "https://openlegislation.uk/noise-emission-in-the-environment-by-equipment-for-use-outdoors-regulations-2001",
  "path": "schedule/6/part/A/paragraph/5",
  "kind": "paragraph",
  "number": "5",
  "heading": "Additional microphone positions on the hemispherical measurement surface (EN ISO 3744:1995)",
  "text": "In addition to clauses 7.2.1 and 7.2.2 of EN ISO 3744:1995 a set of 12 microphones on the hemispherical measurement surface may be used. The location of 12 microphone positions distributed on the surface of a hemisphere of radiusr are listed in the form of Cartesian co-ordinates in the following table. The radiusr of the hemisphere shall be equal to or greater than twice the largest dimension of the reference parallelepiped. The reference parallelepiped is defined as the smallest possible rectangular parallelepiped just enclosing the equipment (without attachments) and terminating on the reflecting plane. The radius of the hemisphere shall be rounded to the nearest higher of the following values: 4, 10, 16m.\nThe number (12) of microphones may be reduced to six, but the microphone positions 2, 4, 6, 8, 10 and 12 following the requirements of clause 7.4.2 of EN ISO 3744:1995 have to be used in any case.\nGenerally the arrangement with six microphone positions on a hemispherical measurement surface has to be used. If there are other specifications laid down in a noise test code in these Regulations for a specific equipment, these specifications shall be used.\nTABLE\nCoordinates of the 12 microphone positions\nNumber of microphone\nx/r\ny/r\nz\n1\n1\n0\n1.5m\n2\n0.7\n0.7\n1.5m\n3\n0\n1\n1.5m\n4\n-0.7\n0.7\n1.5m\n5\n-1\n0\n1.5m\n6\n-0.7\n-0.7\n1.5m\n7\n0\n-1\n1.5m\n8\n0.7\n-0.7\n1.5m\n9\n0.65\n0.27\n0.71r\n10\n-0.27\n0.65\n0.71r\n11\n-0.65\n-0.27\n0.71r\n12\n0.27\n-0.65\n0.71r",
  "extent": "E+W+S",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Words in Sch. 6 Pt. A para. 5 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 8 para. 19(b)(ii) (with Sch. 8 para. 14) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2001/1701/schedule/6/part/A/paragraph/5",
    "retrieved_at": "2026-10-29T07:49:33.077507+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}