# The Non-automatic Weighing Instruments Regulations 2016, Paragraph 1.1


Those instruments shall bear visibly, legibly and indelibly the following inscriptions—
(i) the number of the type examination certificate, where appropriate;
(ii) the manufacturer's name, registered trade name or registered trade mark;
(iii) the accuracy class, enclosed in an oval or in two horizontal lines joined by two half circles;
(iv) maximum capacity, in the form Max …;
(v) minimum capacity, in the form Min …;
(vi) verification scale interval, in the form e = …;
(vii) type, batch or serial number and when applicable;
(viii) for instruments consisting of separate but associated units: identification mark on each unit;
(ix) scale interval if it is different from e, in the form d = …;
(x) maximum additive tare effect, in the form T = + …;
(xi) maximum subtractive tare effect if it is different from Max, in the form T = – …;
(xii) tare interval if it is different from d, in the form dT = …;
(xiii) maximum safe load if it is different from Max, in the form Lim …;
(xiv) the special temperature limits, in the form … oC/… oC;
(xv) ratio between load receptor and load.

---
Source: https://www.legislation.gov.uk/uksi/2016/1152/schedule/8/paragraph/1.1 (the official version)
Page: https://openlegislation.uk/non-automatic-weighing-instruments-regulations-2016/schedule-8/paragraph-1.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.