{
  "url": "https://openlegislation.uk/non-road-mobile-machinery-emission-of-gaseous-and-particulate-pollutants-regulations-1999/schedule-4",
  "json_url": "https://openlegislation.uk/non-road-mobile-machinery-emission-of-gaseous-and-particulate-pollutants-regulations-1999/schedule-4.json",
  "legislation": "uksi/1999/1053",
  "legislation_title": "The Non-Road Mobile Machinery (Emission of Gaseous and Particulate Pollutants) Regulations 1999",
  "legislation_url": "https://openlegislation.uk/non-road-mobile-machinery-emission-of-gaseous-and-particulate-pollutants-regulations-1999",
  "path": "schedule/4",
  "kind": "schedule",
  "number": "4",
  "heading": "(Annex IV to Directive 97/68/EC)",
  "text": "NON-ROAD MOBILE MACHINERY REFERENCE FUEL\nNote: Key properties for engine performance/exhaust emissions are highlighted.\nLimits and units\nTest method\nNote 1: If it is required to calculate thermal efficiency of an engine or vehicle, the calorific value of the fuel can be calculated from:\nSpecificenergy(calorificvalue)(net)MJ/kg=(46.423-8.792.d2+3.17.d)×(1-(x+y+s))+9.42.s-2.499.x. where:\nd is the density at 288 K (15°C)\nx is the proportion by mass of water (%/100)\ny is the proportion by mass of ash (%/100)\ns is the proportion by mass of sulphur (%/100).\nNote 2: The values quoted in the specification are ‘true values’. In establishment of their limit values the terms of ASTMD D 3244 ‘Defining a basis for petroleum produce quality disputes’ have been applied and in fixing minimum value, a minimum difference of 2R above zero has been taken into account; in fixing a maximum and minimum value, the minimum difference is 4R (R = reproducibility).\nNotwithstanding this measure, which is necessary for statistical reasons, the manufactuer of fuel should nevertheless aim at a zero value where the stipulated maximum value is 2R and the mean value in the case of quotations of maximum and minimum limits. Should it be necessary to clarify the question as to whether a fuel meets the requirements of the specifications, the terms of ASTM D 3244 should be applied.\nNote 3: The figures quoted show the evaporated quantities (percentage recovered + percentage loss).\nNote 4: The range of cetane is not in accordance with the requirement of a minimum range of 4R. However, in cases of dispute between fuel supplier and fuel user, the terms in ASTM D 3244 can be used to resolve such disputes provided replicate measurements, of sufficient number to achieve the necessary precision, are made in preference to single determinations.\nNote 5: Even though oxidation stability is controlled, it is likely that shelf life will be limited. Advice should be sought from the supplier as to storage conditions and life.\nNote 6: This fuel should be based straight run and cracked hydrocarbon distillate components only; desulphurization is allowed. It must not contain any metallic additives or cetane improver additives.\nNote 7: Lower values are permitted, in which case the cetane number of reference fuel used is to be reported.\nNote 8: Higher values are permitted, in which case the sulphur content of the reference fuel used is to be reported.\nNote 9: To be kept under constant review in the light of trends in the markets. For the purpose of the initial approval of an engine with no exhaust gas after treatement on request of the applicant a 0.050% mass sulphur minimum is permissible, in which case the measured particulate level must be corrected upward to the average value that is nominally specified for fuel sulphur content (0.150% mass) per the equation below:\nPTadj=PT+[SFC×0.0917×(NSLF-FSF)] where:\nPTadj adjusted PT value (g/kWh)\nPT measured weighted specific emission value for particulate emission (g/kWh)\nSFC weighted specific fuel consumption (g/kWh) calculated according to the formula as below\nNSLF average of the nominal specification of sulphur content mass fraction (ie 0.15%/100)\nFSF fuel sulphur content mass fraction (%/100)\nEquation for the calculation of the weighted specific fuel consumption:\nSFC=∑i=1nGFUEL,ixWFi∑i=1nPixWFi where:\nPi= Pm,i+ PAE,i For the purpose of conformity of production assessments in accordance with section 5.3.2 of Annex I, the requirements must be met using reference fuel with a sulphur content which complies with the minimum/maximum level of 0.1/0.2% mass.\nNote 10: Higher values are permitted up to 855 kg/m3, in which case the density of the reference fuel used is to be reported. For the purpose of conformity of production assessments in accordance with section 5.3.2 of Annex I, the requirements must be met using reference fuel which complies with the minimum/maximum level of 835/845 kg/m3.\nNote 11: All fuel characteristics and limit values are to be kept under review in light of trends in the markets.\nNote 12: To be replaced by EN/ISO 6245 with effect of the date of implementation.\nCetane number\nminimum 45\nmaximum 50\nISO 5165\nDensity at 15°C\nminimum 835 kg/m3\nmaximum 845 kg/m3\nISO 3675, ASTM D4052\nDistillation−95% point\nMaximum 370°C\nISO 3405\nViscosity at 40°C\nMinimum 2.5 mm2/s\nMaximum 3.5mm2/s\nISO 3104\nSulphur content\nMinimum 0.1% mass\nMaximum 0.2% mass\nISO 8754, EN 24260\nFlash point\nMinimum 55°C\nISO 2719\nCFPP\nMinimum −\nMaximum + 5°C\nEN 116\nCopper corrosion\nMaximum 1\nISO 2160\nConradson carbon residue (10% DR)\nMaximum 0.3% mass\nISO 10370\nAsh content\nMaximum 0.01% mass\nASTM D 482\nWater content\nMaximum 0.05% mass\nASTM D 95, D 1744\nNeutralization (strong acid) number\nMinimum 0.20 mg KOH/g\nOxidation stability\nMaximum 2.5 mg/100 ml\nASTM D2274\nAdditives",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "Note 1: If it is required to calculate thermal efficiency of an engine or vehicle, the calorific value of the fuel can be calculated from: Specificenergy(calorificvalue)(net)MJ/kg=(46.423-8.792.d2+3.17.d)×(1-(x+y+s))+9.42.s-2.499.x. where: d is the density at 288 K (15°C) x is the proportion by mass of water (%/100) y is the proportion by mass of ash (%/100) s is the proportion by mass of sulphur (%/100)."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Note 2: The values quoted in the specification are ‘true values’. In establishment of their limit values the terms of ASTMD D 3244 ‘Defining a basis for petroleum produce quality disputes’ have been applied and in fixing minimum value, a minimum difference of 2R above zero has been taken into account; in fixing a maximum and minimum value, the minimum difference is 4R (R = reproducibility). Notwithstanding this measure, which is necessary for statistical reasons, the manufactuer of fuel should nevertheless aim at a zero value where the stipulated maximum value is 2R and the mean value in the case of quotations of maximum and minimum limits. Should it be necessary to clarify the question as to whether a fuel meets the requirements of the specifications, the terms of ASTM D 3244 should be applied."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "Note 4: The range of cetane is not in accordance with the requirement of a minimum range of 4R. However, in cases of dispute between fuel supplier and fuel user, the terms in ASTM D 3244 can be used to resolve such disputes provided replicate measurements, of sufficient number to achieve the necessary precision, are made in preference to single determinations."
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "Note 7: Lower values are permitted, in which case the cetane number of reference fuel used is to be reported."
    },
    {
      "type": "footnote",
      "label": "f5",
      "text": "Note 10: Higher values are permitted up to 855 kg/m3, in which case the density of the reference fuel used is to be reported. For the purpose of conformity of production assessments in accordance with section 5.3.2 of Annex I, the requirements must be met using reference fuel which complies with the minimum/maximum level of 835/845 kg/m3."
    },
    {
      "type": "footnote",
      "label": "f6",
      "text": "Note 3: The figures quoted show the evaporated quantities (percentage recovered + percentage loss)."
    },
    {
      "type": "footnote",
      "label": "f7",
      "text": "Note 9: To be kept under constant review in the light of trends in the markets. For the purpose of the initial approval of an engine with no exhaust gas after treatement on request of the applicant a 0.050% mass sulphur minimum is permissible, in which case the measured particulate level must be corrected upward to the average value that is nominally specified for fuel sulphur content (0.150% mass) per the equation below: PTadj=PT+[SFC×0.0917×(NSLF-FSF)] where: PTadj adjusted PT value (g/kWh) PT measured weighted specific emission value for particulate emission (g/kWh) SFC weighted specific fuel consumption (g/kWh) calculated according to the formula as below NSLF average of the nominal specification of sulphur content mass fraction (ie 0.15%/100) FSF fuel sulphur content mass fraction (%/100) Equation for the calculation of the weighted specific fuel consumption: SFC=∑i=1nGFUEL,ixWFi∑i=1nPixWFi where: Pi= Pm,i+ PAE,i For the purpose of conformity of production assessments in accordance with section 5.3.2 of Annex I, the requirements must be met using reference fuel with a sulphur content which complies with the minimum/maximum level of 0.1/0.2% mass."
    },
    {
      "type": "footnote",
      "label": "f8",
      "text": "Note 8: Higher values are permitted, in which case the sulphur content of the reference fuel used is to be reported."
    },
    {
      "type": "footnote",
      "label": "f9",
      "text": "Note 12: To be replaced by EN/ISO 6245 with effect of the date of implementation."
    },
    {
      "type": "footnote",
      "label": "f10",
      "text": "Note 5: Even though oxidation stability is controlled, it is likely that shelf life will be limited. Advice should be sought from the supplier as to storage conditions and life."
    },
    {
      "type": "footnote",
      "label": "f11",
      "text": "Note 6: This fuel should be based straight run and cracked hydrocarbon distillate components only; desulphurization is allowed. It must not contain any metallic additives or cetane improver additives."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/1999/1053/schedule/4",
    "retrieved_at": "2026-10-29T10:51:33.224449+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}