Part C information required for the technical dossier for a notification under regulation 6(2)

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

Sch. 2 para. 7.3(g) words substituted by Carriage of Dangerous Goods and Use of Transportable Pressure Equipment 2004 Sch. 13 para. 7
Sch. 2 Pt. A word substituted by Carriage of Dangerous Goods and Use of Transportable Pressure Equipment 2007 Sch. 8
Sch 2, Pt A am by Notification of New Substances 2002 reg 3(1)

Tests under this Part shall be according to methods recognised and recommended by the competent international bodies where such recommendations exist.

If it is not technically possible or if it does not appear scientifically necessary to give information, the reasons shall be clearly stated and be subject to acceptance by the competent authority.

The name of the body or bodies responsible for carrying out the studies shall be mentioned.

0.	IDENTITY OF MANUFACTURER AND THE NOTIFIER IF THESE ARE NOT THE SAME: LOCATION OF THE PRODUCTION SITE:
	For substances manufactured outside the Communities and for which, for the purpose of notification, the notifier has been designated as the manufacturer’s sole representative, the identities and addresses of the importers who will be bringing the substance into the Communities.
1.	IDENTITY OF THE SUBSTANCE
1.1	Name
1.1.1	Names in the IUPAC nomenclature
1.1.2	Other names (usual name, trade name, abbreviation)
1.1.3	CAS number and CAS name (if available)
1.2	Molecular and structural formula
1.3	Composition of the substance
1.3.1	Degree of purity (%)
1.3.2	Nature of impurities, including isomers and by-products
1.3.3	Percentage of (significant) main impurities
1.3.4	If the substance contains a stabilizing agent or an inhibitor or other additives, specify: nature, order of magnitude: ..ppm; .. %
1.3.5	Spectral data (UV, IR, NMR or mass spectrum)
1.3.6	Chromatographic data (HPLC, GC)
1.4	Methods of detection and determination
	A full description of the methods used or the appropriate bibliographical references. Apart from methods of detection and determination, information on analytical methods which are known to the notifier and which allow detection of a substance and its transformation products after discharge into the environment as well as determination of the direct exposure of humans.
2.	INFORMATION ON THE SUBSTANCE
2.0	Production
	Information given in this section should be sufficient to allow an approximate but realistic estimation of human and environmental exposure, associated with the production process.Precise details of the production process, particularly those of a commercially sensitive nature, are not required.
2.0.1	Technological process(es) used in production
2.0.2	Exposure estimate related to production: working environment, environment
2.1	Proposed uses
	Information given in this section should be sufficient to allow an approximate but realistic estimation of human and environmental exposure to the substances as associated with the proposed/expected uses.
2.1.1	Types of use: description of the function and the desired effects
2.1.1.1	Technological process(es) related to the use of the substance (where known)
2.1.1.2	Exposure estimate(s) related to the use of the substance (where known): working environment, environment
2.1.1.3	Form under which the substance is marketed: substance, preparation, product
2.1.1.4	Concentration of the substance in marketed preparations and products (where known)
2.1.2	Fields of application with approximate breakdown: industries, farmers and skilled trades, use by the public at large
2.1.3	Where known and where appropriate, the identity of the recipients of the substance
2.2	Estimated production and/or imports for each of the anticipated uses or fields of application
2.2.1	Overall production and/or imports in tonnes per year: the first calendar year, the following calendar years For substances manufactured outside the Communities and for which, for the purpose of notification, the notifier has been designated as the manufacturer’s sole representative, this information must be given for each of the importers identified under section 0 above.
2.2.2	Production and/or imports, broken down in accordance with 2.1.1 and 2.1.2 expressed as a percentage: the first calendar year, the following calendar years
2.3	Recommended methods and precautions concerning:
2.3.1	– Handling
2.3.2	– Storage
2.3.3	– Transport
2.3.4	Fire (nature of combustion gases or pyrolysis, where proposed uses justify this)
2.3.5	Other dangers, particularly chemical reaction with water
2.4	Emergency measures in the case of accidental spillage
2.5	Emergency measures in the case of injury to persons (e.g. poisoning)
2.6	Packaging
3.	PHYSICO-CHEMICAL PROPERTIES OF THE SUBSTANCE
3.0	State of the substance at 20 degrees C and 101.3 kPa
3.9	Flash point
3.10	Flammability
4.	TOXICOLOGICAL STUDIES
4.1	Acute toxicity
	One route of administration is sufficient.Substances other than gases should be tested by oral administration. Gases should be tested by inhalation.
4.1.1	Administered orally
4.1.2	Administered by inhalation.