Article 2 Establishment of safety zones
A safety zone is established around each installation specified in column 1 of the table in Part 1 of the Schedule (being an installation stationed in waters to which subsection (7) of section 21 of the Petroleum Act 1987 applies) having a radius of 500 metres, as respects that installation, from the point which has the co-ordinates of latitude and longitude according to the World Geodetic System 1984 f1 specified in columns 2 and 3 of the table in Part 1 of the Schedule.
A safety zone is established around each installation specified in column 1 of the table in Part 2 of the Schedule (being an installation to be stationed in waters to which subsection (7) of section 21 of the Petroleum Act 1987 applies) having a radius of 500 metres, as respects that installation, from the point which has the co-ordinates of latitude and longitude according to the World Geodetic System 1984 specified in columns 2 and 3 of the table in Part 2 of the Schedule.
Paragraph (2) comes into force, as respects each installation—
on the general coming into force date, where the installation arrives at its station before that date; and
when the installation arrives at its station, in any other case.
Annotations
Footnotes
- f1
-
The World Geodetic System 1984 (“WGS 84”) defines a reference frame for the Earth, for use in geodesy and navigation. It was developed by the United States’ National Geospatial-Intelligence Agency and is maintained by it. WGS 84 is defined at paragraph 2.1 of the NGA Standardization Document, Department of Defense, World Geodetic System 1984 (updated 8 July 2014) (https://earth-info.nga.mil/index.php?dir=wgs84&action=wgs84#tab_wgs84-res). Hard-copies are available upon request from the offices of the Health and Safety Executive, Aberdeen International Business Park (AIBP), Building 2, Level 1, Dyce Drive, Dyce, Aberdeen AB21 0BR.