# The Plugs and Sockets etc. (Safety) Regulations 1994, Regulation 11: Appliances to which Part II applies


(1) Subject to paragraph (2) below, this Part applies to any appliance which–
(a) is designed to operate at a voltage of not less than 200 volts; and
(b) is designed to operate at a maximum rated input of not more than 13 amperes; and
(c) is either–
(i) equipment which is fitted with a flexible cable or cord, is designed to be connected to a socket conforming to BS 1363 by means of that flexible cable or cord and a plug and is ordinarily intended to be so connected directly without the use of a cable connector; or
(ii) a flexible cable or cord which is connected to a portable socket or portable sockets and is designed to be connected to a socket conforming to BS 1363 by means of a plug; or
(iii) a flexible cable or cord which is designed to be connected to electrical equipment by means of an appliance coupler and to connect that electrical equipment to a socket conforming to BS 1363 by means of a plug; or
(iv) a flexible cable or cord which is designed to be connected by means of a cable connector to a flexible cable or cord fitted to electrical equipment, and which is intended to connect that electrical equipment to a socket conforming to BS 1363 by means of a plug; and
(d) is ordinarily intended for domestic use.
(2) This Part does not apply to any appliance specified in Schedule 3 to these Regulations.

---
Source: https://www.legislation.gov.uk/uksi/1994/1768/regulation/11 (the official version)
Page: https://openlegislation.uk/plugs-and-sockets-etc-safety-regulations-1994/regulation-11
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.