# The Port Security (Port of Barrow) Designation Order 2013, Article 2: Port boundary


(1) For the purposes of the definition of “port” in regulation 2 of the Port Security Regulations 2009 , the boundary of the Port of Barrow is defined as follows.
(2) The boundary is generally shown by the inner edges of the red lines on the plan in Part 1 of Schedule 1.
(3) The points marked “A”, “B”, “C” and “D” on that plan have the following Ordnance Survey Great Britain 1936 National Grid coordinates—
— A = 318071.4210E 473891.1633N;
— B = 319263.9317E 473891.1633N;
— C = 321081.4315E 462823.2653N; and
— D = 322446.4925E 466964.0690N.
(4) As to the inland limits of the boundary, so far as not included in the rectangles referred to in paragraph (5), the boundary runs along the beaches and foreshores.
(5) Subject to paragraph (7), as to the parts of the boundary included in the rectangles marked “Inset 1”, “Inset 2”, “Inset 3” and “Inset 4” on the plan in Part 1 of Schedule 1, the boundary is more particularly shown by the inner edges of the red lines on each of the corresponding inset plans, in Part 2 of Schedule 1, headed respectively “Inset Plan 1”, “Inset Plan 2”, “Inset Plan 3” and “Inset Plan 4”.
(6) On Inset Plan 1 and Inset Plan 2, the area marked “E” enclosed in red is inside the boundary.
(7) On Inset Plan 3 and Inset Plan 4, the hatched area marked “F” is outside the boundary.
(8) Where the red line runs along a beach or foreshore, the boundary runs along the edge of the land on that beach or foreshore which is below the level of mean high water springs.

---
Source: https://www.legislation.gov.uk/uksi/2013/3074/article/2 (the official version)
Page: https://openlegislation.uk/port-security-port-of-barrow-designation-order-2013/article-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.