# The Port Security (Port of Oban) Designation Order 2015, Article 2: Port boundary


(1) For the purposes of the definition of “port” in regulation 2 of the Port Security Regulations 2009 , the boundary of the Port of Oban is defined as follows.
(2) The boundary is generally shown by the inner edge of the red line on the plan in Part 1 of Schedule 1.
(3) The points on the line designated by letters of the alphabet have the following World Geodetic System 1984 (WGS84) coordinates—
A 56O24`41.60”N, 005O28`57.73”W
B 56O24`55.59”N, 005O28`34.31”W
C 56O24`56.67”N, 005O28`30.67”W
D 56O24`56.91”N, 005O28`26.49”W
(4) Within the rectangular areas marked “1”, “2” and “3” on the plan in Part 1 of Schedule 1, the boundary is more particularly shown by the red lines on each of the corresponding inset plans, in Part 2 of Schedule 1, headed respectively “Inset Plan 1”, “Inset Plan 2” and “Inset Plan 3”.
(5) The green hatched areas on the plan in Part 1 of Schedule 1 are excluded from the Port of Oban.
(6) Where the red line runs along a beach or foreshore, the boundary runs along the edge of the land on that beach or foreshore which is below the level of mean high water springs.

---
Source: https://www.legislation.gov.uk/uksi/2015/1504/article/2 (the official version)
Page: https://openlegislation.uk/port-security-port-of-oban-designation-order-2015/article-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.