# The Port Security (Ports of Cardiff, Barry and Newport) Designation Order 2013, Article 4: Port boundary: Newport


(1) For the purposes of the definition of “port” in regulation 2 of the Port Security Regulations 2009, the boundary of the Port of Newport is defined as follows.
(2) The boundary is generally shown by the inner edge of the red line on the plan in Part 1 of Schedule 3.
(3) As to the parts of the boundary included in the rectangles marked “Inset 1” and “Inset 2” on the plan in Part 1 of Schedule 3—
(a) the boundary is more particularly shown by the red lines on each of the corresponding inset plans, in Part 2 of Schedule 3, headed respectively “Newport–Inset Plan 1” and “Newport–Inset Plan 2”; and
(b) on Newport–Inset Plan 2, the area hatched lilac is outside the boundary.
(4) Where the red line runs along a beach or foreshore, the boundary runs along the edge of the land on that beach or foreshore which is below the level of mean high water springs.

---
Source: https://www.legislation.gov.uk/uksi/2013/3180/article/4 (the official version)
Page: https://openlegislation.uk/port-security-ports-of-cardiff-barry-and-newport-designation-order-2013/article-4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

