# The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019, Paragraph 2: Amendment to regulation 2

Extent: E+W+S

(1) Regulation 2 (interpretation) is amended as follows.
(2) In paragraph (1)—
(a) omit the definition of “compliance mark”;
(b) for the definition of “relevant aerosol dispenser” substitute—
““relevant aerosol dispenser” means an aerosol dispenser which does not have a maximum capacity of—
(a) less than 50ml; or
(b) greater than that specified—
(i) in point 3.1 of Schedule 1A, in relation to metal aerosol dispensers (1000ml);
(ii) in point 4.1.1 of Schedule 1A, in relation to aerosol dispensers with plastic coated or permanently protected glass containers or plastic aerosol dispensers which cannot splinter on bursting (220ml); or
(iii) in point 4.2.1 of Schedule 1A, in relation to aerosol dispensers with unprotected glass containers or plastic aerosol dispensers which may splinter on bursting (150ml);”.
(c) after the definition of “relevant aerosol dispenser” insert—
““UK marking” means the marking in the form set out in Annex 2 of Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93.”.
(3) After paragraph (1) insert—
“(1A) Schedule 1A reproduces the provisions of the Annex to the Directive with amendments to correct deficiencies in retained EU law.
(1B) A reference to a provision of Schedule 1A is a reference to the equivalent provision of the Annex to the Directive as set out in that Schedule.”.
(4) In paragraph (2)—
(a) for “the Annex to the Directive” substitute “ Schedule 1A ”;
(b) after “is a reference to” insert “ a test method specified in point 6.1.4.1(b) or (c) which is ”;
(c) in subparagraph (a)—
(i) for “that Annex” substitute “ the Annex to the Directive ”;
(ii) after “point 6.1.4.3” insert “ of that Annex ”;
(d) in subparagraph (b) after “6.1.4.3” insert “ of Schedule 1A ”.

---
Source: https://www.legislation.gov.uk/uksi/2019/696/schedule/13/paragraph/2 (the official version)
Page: https://openlegislation.uk/product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019/schedule-13/paragraph-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.