{
  "url": "https://openlegislation.uk/product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019/schedule-19/paragraph-43",
  "json_url": "https://openlegislation.uk/product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019/schedule-19/paragraph-43.json",
  "legislation": "uksi/2019/696",
  "legislation_title": "The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019",
  "legislation_url": "https://openlegislation.uk/product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019",
  "path": "schedule/19/paragraph/43",
  "kind": "paragraph",
  "number": "43",
  "heading": "Amendment to Schedule 6",
  "text": "(1) Schedule 6 is amended as follows.\n(2) In the shoulder reference for “Regulation 50” substitute “ Regulation 48 ”.\n(3) In the heading for “notified” substitute “ approved ”.\n(4) For “a notified body”, in each place it occurs, substitute “ an approved body ”.\n(5) For “the notified body”, in each place it occurs, substitute “ the approved body ”.\n(6) In paragraph 5—\n(a) before “registration number”, in both places it occurs, insert “ UK ”; and\n(b) in sub-paragraph (a), for the words from “Article 1” to “time to time)” substitute “ paragraph 5A ”;\n(7) After paragraph 5 insert—\n“5A (1) Pyrotechnic articles must be labelled with a UK registration number comprising the following:\n(a) the four-digit identification number of the approved body that has issued a Type-examination certificate (Schedule 2A, Module B), certificate of conformity (Schedule 2A, Module G) or quality system approval (Schedule 2A, Module H), as applicable;\n(b) the category of the pyrotechnic article for which conformity is certified in abbreviated format, in upper case—\n(i) F1, F2, F3 or F4 for fireworks of category 1, 2, 3 and 4 respectively;\n(ii) T1 or T2 for theatrical pyrotechnic articles of category T1 and T2 respectively; and\n(iii) P1 or P2 for other pyrotechnic articles of category P1 and P2 respectively; and\n(c) the processing number used by the approved body for the pyrotechnic article.\n(2) The UK registration number must be structured as follows: ‘XXXX — YY — ZZZZ…’, where XXXX refers to sub-paragraph (1)(a), YY refers to sub-paragraph (1)(b) and ZZZZ… refers to sub-paragraph (1)(c).”\n(7) In paragraph 6—\n(a) for “After 16th October 2016” substitute “From IP completion day”;\n(b) in sub-paragraph (a) for the words from “the Annex” to “time to time)” substitute “ paragraph 6A ”;\n(c) in sub-paragraph (b) for “notified” substitute “ approved ”.\n(8) After para 6 insert—\n“6A (1) Entries made in the register from IP completion day must contain at least the following information:\n(a) UK registration number;\n(b) date of issue of Type-examination certificate (where the conformity assessment procedure set out in Part 1 of Schedule 2A (Module B) has been undertaken), certificate of conformity (where the conformity assessment procedure set out in Part 5 of Schedule 2A (Module G) has been undertaken) or quality system approval (where the conformity assessment procedure set out in Part 6 of Schedule 2A (Module H) has been undertaken) as applicable, and date of expiry where applicable;\n(c) manufacturer;\n(d) type of product (generic) and subtype, if applicable;\n(e) where applicable, which conformity assessment procedure has been undertaken from those set out in Part 2 of Schedule 2A (Module C2), Part 3 of Schedule 2A (Module D) and Part 4 of Schedule 2A (Module E); and\n(f) where applicable, the approved body that undertook the conformity assessment procedure described in sub-paragraph (e).\n(2) Sub-paragraphs (1)(e) and (1)(f) apply where the register is maintained by an approved body carrying out the conformity assessment procedure set out in Part 1 of Schedule 2A (Module B), except where the relevant information is not known to that approved body.”.\n(9) In paragraph 7, for “harmonised” substitute “ designated ”.\n(10) In paragraph 14 for “notified under the Directive” substitute “ approved under these Regulations ”.\n(11) In paragraph 15—\n(a) for “notified”, in the second place it occurs, substitute “ approved ”; and\n(b) omit “under the Directive”.",
  "extent": "E+W+S",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Words in Sch. 19 para. 43(7)(a) substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(h)(vi)"
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Words in Sch. 19 para. 43(8) substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(h)(vii)"
    },
    {
      "type": "I",
      "label": "I1",
      "text": "Sch. 19 para. 43 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2019/696/schedule/19/paragraph/43",
    "retrieved_at": "2026-10-28T22:43:04.909537+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}