# The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019, Paragraph 43: Amendment to Schedule 6

Extent: E+W+S

(1) Schedule 6 is amended as follows.
(2) In the shoulder reference for “Regulation 50” substitute “ Regulation 48 ”.
(3) In the heading for “notified” substitute “ approved ”.
(4) For “a notified body”, in each place it occurs, substitute “ an approved body ”.
(5) For “the notified body”, in each place it occurs, substitute “ the approved body ”.
(6) In paragraph 5—
(a) before “registration number”, in both places it occurs, insert “ UK ”; and
(b) in sub-paragraph (a), for the words from “Article 1” to “time to time)” substitute “ paragraph 5A ”;
(7) After paragraph 5 insert—
“5A (1) Pyrotechnic articles must be labelled with a UK registration number comprising the following:
(a) the four-digit identification number of the approved body that has issued a Type-examination certificate (Schedule 2A, Module B), certificate of conformity (Schedule 2A, Module G) or quality system approval (Schedule 2A, Module H), as applicable;
(b) the category of the pyrotechnic article for which conformity is certified in abbreviated format, in upper case—
(i) F1, F2, F3 or F4 for fireworks of category 1, 2, 3 and 4 respectively;
(ii) T1 or T2 for theatrical pyrotechnic articles of category T1 and T2 respectively; and
(iii) P1 or P2 for other pyrotechnic articles of category P1 and P2 respectively; and
(c) the processing number used by the approved body for the pyrotechnic article.
(2) The UK registration number must be structured as follows: ‘XXXX — YY — ZZZZ…’, where XXXX refers to sub-paragraph (1)(a), YY refers to sub-paragraph (1)(b) and ZZZZ… refers to sub-paragraph (1)(c).”
(7) In paragraph 6—
(a) for “After 16th October 2016” substitute “From IP completion day”;
(b) in sub-paragraph (a) for the words from “the Annex” to “time to time)” substitute “ paragraph 6A ”;
(c) in sub-paragraph (b) for “notified” substitute “ approved ”.
(8) After para 6 insert—
“6A (1) Entries made in the register from IP completion day must contain at least the following information:
(a) UK registration number;
(b) date of issue of Type-examination certificate (where the conformity assessment procedure set out in Part 1 of Schedule 2A (Module B) has been undertaken), certificate of conformity (where the conformity assessment procedure set out in Part 5 of Schedule 2A (Module G) has been undertaken) or quality system approval (where the conformity assessment procedure set out in Part 6 of Schedule 2A (Module H) has been undertaken) as applicable, and date of expiry where applicable;
(c) manufacturer;
(d) type of product (generic) and subtype, if applicable;
(e) where applicable, which conformity assessment procedure has been undertaken from those set out in Part 2 of Schedule 2A (Module C2), Part 3 of Schedule 2A (Module D) and Part 4 of Schedule 2A (Module E); and
(f) where applicable, the approved body that undertook the conformity assessment procedure described in sub-paragraph (e).
(2) Sub-paragraphs (1)(e) and (1)(f) apply where the register is maintained by an approved body carrying out the conformity assessment procedure set out in Part 1 of Schedule 2A (Module B), except where the relevant information is not known to that approved body.”.
(9) In paragraph 7, for “harmonised” substitute “ designated ”.
(10) In paragraph 14 for “notified under the Directive” substitute “ approved under these Regulations ”.
(11) In paragraph 15—
(a) for “notified”, in the second place it occurs, substitute “ approved ”; and
(b) omit “under the Directive”.

---
Source: https://www.legislation.gov.uk/uksi/2019/696/schedule/19/paragraph/43 (the official version)
Page: https://openlegislation.uk/product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019/schedule-19/paragraph-43
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.