# The Product Safety and Metrology etc. (Amendment) Regulations 2021, Regulation 5: Amendment to the Non-automatic Weighing Instruments Regulations 2016


(1) The Non-Automatic Weighing Instruments Regulations 2016 are amended as follows.
(2) In regulation 2(1) (interpretation)—
(a) for the definition of “disqualification mark” substitute—
““disqualification mark” means a marking in the form set out in paragraph 1 of Schedule A1;”;
(b) for the definition of “re-qualification mark” substitute—
““re-qualification mark” means a marking in the form set out in paragraph 2 of Schedule A1;”.
(3) After regulation 67(6) (disqualification), insert—
“(6A) A disqualification mark may be affixed to a regulated non-automatic weighing instrument by affixing to the instrument a label which clearly, legibly and indelibly bears the disqualification mark.”.
(4) Before Schedule 1 insert—
“SCHEDULE A1
Disqualification and re-qualification marks
Regulation 2(1)
Disqualification mark
1. A disqualification mark must have the following form—
Re-qualification mark
2. A re-qualification mark must have the following form—”

---
Source: https://www.legislation.gov.uk/uksi/2021/1273/regulation/5 (the official version)
Page: https://openlegislation.uk/product-safety-and-metrology-etc-amendment-regulations-2021/regulation-5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.