Explanatory note
(This note is not part of the Regulations)
These Regulations amend the Public Service Vehicles (Conditions of Fitness, Equipment, Use and Certification) Regulations 1981.
Regulation 3 revokes regulations 7 and 9 to 12 of the 1981 Regulations. Those Regulations contained provisions concerning the suspension, brake and steering connections, locking of nuts and steering.
Regulation 4 amends regulation 20 of the 1981 Regulations so that entrances and exits provided with lifting platforms or ramps for the benefit of disabled passengers do not have to comply with the requirements relating to step height provided that another entrance which complies with these requirements is placed on the near side or, in certain cases, on the rear face of the vehicle.
Regulation 5 amends regulation 21(9) of the 1981 Regulations so as to create a further exception to the requirement that every entrance must be placed on the near side of a vehicle. The amendment enables an entrance to be in the rear face of a vehicle if that entrance is fitted with a lifting platform or a ramp for the benefit of disabled passengers.
Regulation 6 amends regulation 23 of the 1981 Regulations by adding a Schedule imposing supplementary conditions relating to power operated doors on vehicles manufactured on or after 14th May 1990 and first used on or after 1st October 1990 and, with effect from 1st April 1993, on vehicles registered on or after 1st April 1980.
Regulation 7 amends regulation 28 of the 1981 Regulations. It exempts wheelchairs from the requirement that a length of at least 400 millimetres is to be allowed for the accommodation of each seated passenger. It also inserts a new provision to the effect that where a folding table is fitted to the rear of a seat, measurements made for the purposes of assessing the space between seats are to be made with the table folded.
Regulation 8 amends regulation 35 of and substitutes a new Schedule 4 to the 1981 Regulations. The Schedule specifies the type of fire extinguisher to be carried in a vehicle to which the Regulations apply and regulation 35 gives effect to the Schedule.
Copies of the British Standard specifications may be obtained from any of the sales outlets operated by the British Standards Institution, or by post from the British Standards Institution at Linford Wood, Milton Keynes, MK14 6LE (Telephone number: Milton Keynes (STD 0908) 22116).