OpenLegislation

Regulation 6 Stability

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

(1)

The stability of a vehicle shall be such that—

(a)

in the case of a double-decked vehicle, the point at which overturning occurs would not be passed if, when the vehicle is complete, fully equipped for service and loaded with weights placed in the correct relative positions to represent the driver, a full complement of passengers on the upper deck only and a conductor (if carried), the surface on which the vehicle stands were tilted to either side to an angle of 28 degrees from the horizontal; and

(b)

in the case of a single-decked vehicle and of a half-decked vehicle, the point at which overturning occurs would not be passed if, when the vehicle is complete, fully equipped for service and loaded with weights placed in the correct relative positions to represent a driver, a full complement of passengers and a conductor (if carried), the surface on which the vehicle stands were tilted to either side to an angle of 35 degrees from the horizontal.

(2)

For the purpose of ascertaining whether the requirements of paragraph (1) have been complied with, the height of any stop used to prevent a wheel of the vehicle from slipping sideways shall not be greater than two-thirds of the distance between the surface upon which the vehicle stands before it is tilted and that part of the rim of that wheel which is nearest to that surface when the vehicle is loaded in accordance with the said requirements.

(3)

For the purposes of this Regulation 63.5 kilograms shall be deemed to represent the weight of one person.