# The Pyrotechnic Articles (Safety) Regulations 2015, Paragraph 6A

Extent: E+W+S

(1) Entries made in the register from IP completion day must contain at least the following information:
(a) UK registration number;
(b) date of issue of Type-examination certificate (where the conformity assessment procedure set out in Part 1 of Schedule 2A (Module B) has been undertaken), certificate of conformity (where the conformity assessment procedure set out in Part 5 of Schedule 2A (Module G) has been undertaken) or quality system approval (where the conformity assessment procedure set out in Part 6 of Schedule 2A (Module H) has been undertaken) as applicable, and date of expiry where applicable;
(c) manufacturer;
(d) type of product (generic) and subtype, if applicable;
(e) where applicable, which conformity assessment procedure has been undertaken from those set out in Part 2 of Schedule 2A (Module C2), Part 3 of Schedule 2A (Module D) and Part 4 of Schedule 2A (Module E); and
(f) where applicable, the approved body that undertook the conformity assessment procedure described in sub-paragraph (e).
(2) Sub-paragraphs (1)(e) and (1)(f) apply where the register is maintained by an approved body carrying out the conformity assessment procedure set out in Part 1 of Schedule 2A (Module B), except where the relevant information is not known to that approved body.

---
Source: https://www.legislation.gov.uk/uksi/2015/1553/schedule/6/paragraph/6A (the official version)
Page: https://openlegislation.uk/pyrotechnic-articles-safety-regulations-2015/schedule-6/paragraph-6A
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.