# The Rail Vehicle Accessibility (Connex South Eastern Class 375 Vehicles) Exemption Order 2000, Article 4


(1) Subject to articles 5 and 6 below, the exempted vehicles are hereby authorised to be used for carriage even though they do not conform with those provisions of the Rail Vehicle Accessibility Regulations 1998 referred to in paragraph (2) below.
(2) The provisions with which the exempted vehicles are not required to conform are—
(a) regulation 4(3)(b);
(b) regulation 5, in so far as it relates to door control devices which are not operated by the application of pressure and which do not control doors which are in the side of an exempted vehicle;
(c) regulation 5(1)(a), in so far as it relates to the doors in the side of an exempted vehicle;
(d) regulation 12, in so far as it relates to the sliding doors between the passenger saloon and a driver’s cab in the end of an exempted vehicle, and subject to the condition in article 5(1) below;
(e) regulation 13, in so far as it relates to the visual passenger information systems inside the passenger saloon of an exempted vehicle, and subject to the condition in article 5(2) below;
(f) regulation 13(7), in so far as it relates to the requirement that the first letter of, and numbers used in, announcements on visual systems on the front of an exempted vehicle shall be not less than 70 millimetres high, and subject to the condition in article 5(4) below.

---
Source: https://www.legislation.gov.uk/uksi/2000/2050/article/4 (the official version)
Page: https://openlegislation.uk/rail-vehicle-accessibility-connex-south-eastern-class-375-vehicles-exemption-order-2000/article-4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.