# The Rail Vehicle Accessibility Regulations 1998, Regulation 10: Interior transparent surfaces


(1) Subject to paragraph (2) any transparent surface in the interior of a regulated rail vehicle shall:
(a) be separated from an area in which a disabled person can walk, or go in a wheelchair, by a seat, table or other fitting; or
(b) bear a coloured marking which shall be not less than 140 millimetres and not more than 160 millimetres high and extend horizontally across the whole width of the panel at a height of 1,500 millimetres measured vertically from the floor to the bottom edge of that marking; or
(c) be bounded on any side which is not attached to the floor, wall or ceiling of the vehicle by a handrail which shall comply with regulation 11(2).
(2) Where such a surface is a door it shall comply with paragraph (1)(b).

---
Source: https://www.legislation.gov.uk/uksi/1998/2456/regulation/10 (the official version)
Page: https://openlegislation.uk/rail-vehicle-accessibility-regulations-1998/regulation-10
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

