OpenLegislation

Regulation 2A Interpretation: designated standardF1

England, Wales and Scotland

(1)

In these Regulations a “designated standard” means a technical specification which is—

(a)

adopted by a recognised standardisation body F2or an international standardising body, for repeated or continuous application, with which compliance is not compulsory; and

(b)

designated and published by the Secretary of State in accordance with paragraphs (3) to (5).

(2)

In this regulation, a “technical specification” means a document that prescribes technical requirements to be fulfilled by a product, process, service or system and which lays down one or more of the following—

(a)

the characteristics required of a product, including—

(i)

levels of quality, performance, interoperability, environmental protection, health, safety or dimensions, and

(ii)

the requirements applicable to the product as regards the name under which the product is sold, terminology, symbols, testing and test methods, packaging, marking or labelling and conformity assessment procedures; and

(b)

production methods and processes relating to the product, where these have an effect on the characteristics of the product.

(3)

Before designating the reference to a technical specification adopted by the British Standards Institution, the Secretary of State must have regard to whether the technical specification is consistent with F3such technical specifications adopted by the other recognised standardisation bodies F4or by international standardising bodies as the Secretary of State considers to be relevant.

(4)

The Secretary of State must publish a reference to a designated technical specification in a manner which the Secretary of State considers appropriate to draw the standard to the attention of any person who may have an interest in the standard.

(5)

The Secretary of State may withdraw the designation of a technical specification, and as soon as reasonably practicable after doing so must publish notice of that withdrawal in a manner which the Secretary of State considers appropriate to draw that withdrawal to the attention of any person who may have an interest in it.

(6)

In paragraph (2), a reference to a “product” is a reference to any materials, components and EEE to which these Regulations apply.

(F57)

In this regulation—

(a)

“international standardising body” has the same meaning as it has for the purposes of the Agreement on Technical Barriers to Trade, part of Annex 1A to the agreement establishing the World Trade Organisation signed at Marrakesh on 15 April 1994 (as modified from time to time);

(b)

a “recognised standardisation body” means any one of the following—

(i)

the European Committee for Standardisation (CEN);

(ii)

the European Committee for Electrotechnical Standardisation (Cenelec);

(iii)

the European Telecommunications Standards Institute (ETSI);

(iv)

the British Standards Institution (BSI).

Annotations

Textual amendments

F1

Regs. 2A, 2B inserted (E.W.S.) (31.12.2020) by The Waste (Miscellaneous Amendments) (EU Exit) (No. 2) Regulations 2019 (S.I. 2019/188), regs. 1(2)(b), 18(3) (as amended by S.I. 2020/1540, regs. 1(2), 11(2)); 2020 c. 1, Sch. 5 para. 1(1)

F2

Words in reg. 2A(1)(a) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 6(a); S.I. 2020/1662, reg. 2(ee)

F3

Word in reg. 2A(3) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 6(b)(i); S.I. 2020/1662, reg. 2(ee)

F4

Words in reg. 2A(3) inserted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 6(b)(ii); S.I. 2020/1662, reg. 2(ee)

F5

Reg. 2A(7) substituted (31.12.2020) by European Union (Future Relationship) Act 2020 (c. 29), s. 40(7), Sch. 4 para. 6(c); S.I. 2020/1662, reg. 2(ee)