Part I STANDARDS APPROVED
| 09–4 | 66 and 132kV impregnated paper insulated oil-filled and gas-pressure type power cable systems Issue 3, 1991 |
| 09–5 | 275 and 400kV impregnated paper insulated oil-filled and gas compression type power cable systems Issue 3, 1991 |
| 09–12 | Impregnated paper insulated corrugated aluminium sheathed 6350/11000 volt cables Issue 2, 1990 |
| 09–17 | Single core cables for use in substations having extruded insulation and rated voltages of 6350/11000 volts and 19000/33000 volts Issue 2, 1991 |
| 09–21 | Crossed-linked polymeric insulated triplex cables for a rated voltage of 6350/11000 volts (Um=12000V) Issue 1, 1990 |
| 12–5 | Indicating lamps–filament type Issue 2, 1989 |
| 12–10 | Single phase domestic cut-outs, connector blocks and interconnecting units up to 100A rating Issue 2, 1990 |
| 37–2 | L.V. distribution fuse boards Issue 3, 1990 Errata, 1990 |
| 41–10 | Switchgear for use on 66, 132, 275 and 400kV systems Addendum, 1991 to Issue 3, 1989 |
| 41–15 | Standard circuit diagrams for equipment in 132kV substations Part 1: Transformer feeder, transformer end Amendment 1, 1991 to Issue 1, 1978 Part 6: Bus section and bus coupler Issue 1, 1989 Part 9: AC traction supplies to British Rail Issue 1, 1989 |
| 41–26 | Distribution switchgear for service up to 36kV (Cable connected) Issue 1, 1991 |
| 41–27 | Outdoor distribution switchgear for service up to 36kV (Overhead conductor connected) Issue 1, 1991 |
| 43–13 | Aerial bundled conductors (ABC) insulated with cross-linked polyethylene for low voltage overhead distribution Issue 2, 1990 Corrigendum 1991 |
| 43–14 | Conductor fittings and associated apparatus for use with lv aerial bundled conductors Issue 2, 1990 |
| 43–15 | Insulator binds and equivalent helical fittings for overhead lines Issue 2, 1990 |
| 43–88 | Treatment of wood poles and associated timber for overhead lines Issue 3, 1987 |
| 43–90 | Anti-climbing devices and safety signs for hv lines up to and including 400kV Issue 3, 1991 |
| 43–93 | Line Insulators Issue 3, 1986 Amendment 1987 |
| 43–94 | Earth rods and their connectors Issue 3, 1990 |
| 44–5 | Testing the insulation systems of stator coils for rotating electrical machines Issue 5, 1987 |
| 98–5 | Automatic ultrasonic testing of tubes Part 3: Longitudinally submerged arc welded steel tubes, outside diameters 160mm and above Amendment No. 1, 1990 to Issue 2, 1989 |
| 98–16 | Defect evaluation and size estimation by the manual ultrasonic testing method Issue 1, 1990 |
| 98–17 | Radiographic examination of fusion welded butt joints in steel Issue 1, 1988 |
| 98–19 | Acceptance criteria for pipe circumferential butt welds in ferritic alloy steels Issue 1, 1990 |
| 98–23 | Ultrasonic and visual inspection of components lined with tin based white metal Issue 1, 1990 |
| T2 | Transformers and reactors 1966 Section 12: Cable boxes, cable sealing-end chambers and disconnecting chambers Revision 1, 1987 |
| G59/1 | Recommendations for the connection of embedded generating plant to the Regional Electricity Companies' distribution systems 1991 |
| G72 | Operational requirements for SF6 switchgear under loss of pressure conditions 1991 |
| L38/1 | Protective greasing of PVC-covered copper and bare and PVC-covered aluminium based overhead line conductors 1991 |
| M10/4 | Serial numbering of meters 1991 |
| M25/1 | Improving the security of meters and associated service equipment 1987 |
| P23/1 | Customers' earth fault protection for compliance with the IEE Wiring Regulations for electrical installations 1991 |
| ACE 80 | Guide to the maintenance of electrical plant up to and including 132kV 1981 incorporating revised section 30, 1989 |