Part I STANDARDS
| 09—1 | Lead sleeves for electric cables (metric units) Amendment 1, 1993 to Issue 1, 1970 |
| 09—3 | 33kV impregnated paper insulated oil–filled and gas pressure type power cable systems Amendment 1, 1993 to Issue 2, 1982 |
| 09—5 | 275 and 400kV impregnated paper insulated oil–filled and gas compression type power cable systems Amendment 1, 1993 to Issue 3, 1991 |
| 09—10 | Porcelain insulators for 33, 66, 132, 275 and 400kV pressure–assisted cable outdoor sealing ends Amendment 1, 1993 to Issue 3, 1976 |
| 09—13 | Performance specification for high voltage heat–shrinkable components for use with high voltage solid type cables up to and including 33 000 volts Amendment 1, 1993 to Issue 1, 1981 |
| 09—16 | Testing specification for metallic sheathed power cables with extruded cross–linked polyethylene insulation and accessories for system voltages of 66kV and 132kV Amendment 1, 1993 to Issue 1, 1983 |
| 09—20 | Single core cables having cross linked polyethylene insulation and lead sheath for rated voltage 19 000/33 000 volts (Um03736 000 volts) Amendment 1, 1993 to Issue 1, 1990 |
| 12—3 | Outdoor meter cupboards Issue 3, 1992 |
| 12—9 | Wiping glands for metallic–sheathed cables Amendment 1, 1993 to Issue 2, 1980 |
| 12—11 | Indoor and outdoor cable boxes for switchgear (for service at system nominal voltages of 6.6,11 and 33kV) Amendment 1, 1993 to Issue 2, 1981 |
| 12—12 | Compounds for use in 33kV solid type cable accessories Amendment 1, 1993 to Issue 1, 1977 |
| 12—14 | Impregnated crepe paper for cable jointing in solid type cable accessories Amendment 1, 1993 to Issue 1, 1976 |
| 12—18 | Polyester resin/glass fibre protection boxes and protective shrouds for oil–filled and gas–pressure cable accessories Amendment 1, 1993 to Issue 1, 1980 |
| 12—24 | Plastic ducts for buried electric cables Amendment 1, 1991 and Amendment 2, 1993 to Issue 1, 1989 |
| 35—1 | Distribution transformers (from 16kVA to 1000kVA) Amendment 1, 1993 to Issue 4, 1985 |
| 35—2 | Emergency rated system transformers—33/11.5kV delta/star and star/star connected Amendment 1, 1993 to Issue 4, 1982 |
| 35—16 | Interface arrangement for direct connection of gas–insulated metal–enclosed switch– gear to 132kV, 275kV and 400kV transformers Issue 1, 1992 |
| 37—2 | LV distribution fuse–boards Amendment 1, 1993 to Issue 3, 1990 |
| 41—11 | Tubular aluminium busbars, connections and terminal fittings for 132kV outdoor substations Amendment 1, 1993 to Issue 2, 1982 |
| 41—24 | Guidelines for the design, installation, testing and maintenance of main earthing systems in substations Issue 1, 1992 |
| 41—26 | Distribution switchgear for service up to 36kV (cable connected) Amendment 1, 1993 to Issue 1, 1991 |
| 41—27 | Outdoor distribution switchgear for service up to 36kV (overhead conductor connected) Corrigendum 1992 and Amendment 1, 1993 to Issue 1, 1991 |
| 43—1 | Survey and preparation of ground line profiles and plotting of tower positions for steel tower overhead transmission lines at 132kV and higher voltages Amendment 1, 1993 to Issue 2, 1986 |
| 43—4 | Design of foundations for steel towers for overhead transmission lines at 132kV and higher voltages Amendment 1, 1993 to Issue 2, 1986 |
| 43—5 | Fabrication and galvanising of tower and foundation steelwork for overhead transmission lines at 132kV and higher voltages Amendment 1, 1993 to Issue 2, 1986 |
| 43—7 | 132kV steel tower transmission lines: specification L4(M) — 1978 1 039 175 mm2 ACSR per phase 1 039 70 mm2 ACSR earthwire Amendment 1, 1993 to Issue 2, 1985 |
| 43—9 | 132kV steel tower transmission lines: specification L7(C) — 1978 2 039 175 mm2 ACSR per phase — 1 039 175 mm2 ACSR earthwire Erratum 1991 to Amendment 1, 1993 to Issue 1, 1986 |
| 43—12 | Insulated aerial bundled conductors erection requirements for lv overhead distribution systems Amendment 1, 1993 to Issue 1, 1986 |
| 43—14 | Conductor fitting and associated apparatus for use with lv aerial bundled conductors Erratum 1991 to Amendment 1, 1993 to Issue 2, 1990 |
| 43—30 | Low voltage overhead lines on wood poles Amendment 1, 1993 to Issue 2, 1981 |
| 43—40 | High voltage single circuit overhead lines on wood poles Amendment 1, 1993 to Issue 1, 1988 |
| 43—50 | 132kV single circuit overhead lines on wood poles Amendment 1, 1993 to Issue 1, 1984 |
| 43—88 | Selection and treatment of wood poles and associated timber for overhead lines Part 1: Technical requirements Issue 4, 1993 Part 2: Essential quality requirements Issue 1, 1992 |
| 43—90 | Anti–climbing devices and safety signs for hv lines up to and including 400kV Issue 4, 1993 |
| 43—92 | Conductor fittings for overhead lines Amendment 1, 1993 to Issue 2, 1985 |
| 43—93 | Line insulators Amendment 2, 1993 to Issue 3, 1986 |
| 43—95 | Steelwork for overhead lines Amendment 1, 1993 to Issue 5, 1989 |
| 48—2 | Fault passage indicators for 6.6kV and 11kV underground and overhead distribution systems Amendment 1, 1993 to Issue 1, 1974 |
| 48—3 | Instantaneous high–impedance differential protection Amendment 2, 1993 to Issue 1, 1977 |
| 48—4 | DC relays associated with a tripping function in protection systems Amendment 1, 1993 to Issue 3, 1983 |
| 50—2 | Bimetallic ammeters Amendment 1, 1993 to Issue 1, 1975 |
| T2 | Specification for transformers and reactors 1966 Section 26: Tap–changing equipment Revision 1, 1991 |
| C84—1 | Operation of oil–filled pressure–assisted cable systems up to 400kV operating voltage 1992 |
| C90 | Type approval tests for straight joints for 6350/11 000 volts three–core mass impregnated non–draining paper insulated solid type cables 1984 Amendment 1, 1993 |
| C93 | Type approval tests for mechanical connections to metallic sheaths of cables 1989 Addendum, 1992 |
| C94 | Guide for physical inspection of newly manufactured 33kV mind cables 1991 |
| G39/1 | Model code of practice covering electrical safety in the planning, installation, commissioning and maintenance of public lighting and other street furniture 1992 |
| G59/1 | Recommendations for the connection of embedded generating plant to the Regional Electricity Companies' distribution systems 1991 Amendment 1, 1992 |
| G74 | Procedure to meet the requirements of IEC 909 for the calculation of short–circuit currents in three–phase AC power systems 1992 |
| ETR119 | Third report on optical fibres 1991 Appendices |