{
  "url": "https://openlegislation.uk/road-vehicles-approval-regulations-2020/schedule-2/part-2/chapter-2/crossheading-1/paragraph-4",
  "json_url": "https://openlegislation.uk/road-vehicles-approval-regulations-2020/schedule-2/part-2/chapter-2/crossheading-1/paragraph-4.json",
  "legislation": "uksi/2020/818",
  "legislation_title": "The Road Vehicles (Approval) Regulations 2020",
  "legislation_url": "https://openlegislation.uk/road-vehicles-approval-regulations-2020",
  "path": "schedule/2/part/2/chapter/2/crossheading/1/paragraph/4",
  "kind": "paragraph",
  "number": "4",
  "heading": "Testing of restraint system anchorages",
  "text": "(1) A static test shall be conducted on the anchorage points for both the wheelchair tie-downs and occupant restraints in accordance with the following requirements—\n(a) The tests must be conducted on a vehicle or a representative section of a vehicle structure including any vehicle fittings that are likely to contribute to the strength or rigidity of the structure,\n(b) The forces specified in paragraph 5 below must be applied by means of a surrogate wheelchair of adequate strength as defined in ISO 10542, or equivalent, with attachment points for the front and rear tie-downs and reproducing the geometry of the wheelchair tie-down system,\n(c) The forces specified in paragraph 6 below must be applied by means of a traction device specified in paragraph 5.3.4 of Annex I to Directive 76/115/EEC as amended by Directive 96/38/EC and supported on the surrogate wheelchair defined in (b) above;\n(d) The forces in sub-paragraphs (b) and (c) above must be applied simultaneously in the forward direction at an angle of 10° ± 5° above the horizontal plane. The force in (b) must be applied at a height of not less than 200 mm and not more than 300 mm measured vertically above the floor of the wheelchair space;\n(e) The force in paragraph 5(b) must be applied in the rearward direction at an angle of 10° ± 5° above the horizontal plane at a height of not less than 200 mm and not more than 300 mm measured vertically above the floor of the wheelchair space;\n(f) All forces must be applied as rapidly as possible through the central vertical axis of the wheelchair and wheelchair space;\n(g) All forces must be maintained for a period of not less than 0.2 seconds.\n(2) For test purposes the components comprising the wheelchair tie-down and occupant restraint devices may be replaced with components suitable for test purposes having a similar function.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2020/818/schedule/2/part/2/chapter/2/crossheading/1/paragraph/4",
    "retrieved_at": "2026-10-28T22:27:15.937710+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}