# The Russia (Sanctions) (EU Exit) (Amendment) Regulations 2025, Schedule 3: New table in renumbered Part 2 of Schedule 3I


“
Commodity code (1)
Description (2)
4401 21
Coniferous wood in chips or particles (excluding those of a kind used principally for dying or tanning purposes)
4401 22 10
Wood in chips or particles, of eucalyptus
4401 22 90
Wood in chips or particles (excluding those of a kind used principally for dying or tanning purposes, coniferous wood and eucalyptus)
4403 11
Wood in the rough, treated with paint, stains, creosote or other preservatives, coniferous (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.)
4403 12
Wood in the rough, treated with paint, stains, creosote or other preservatives, non-coniferous (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.)
4403 21 10
Sawlogs of pine “Pinus spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared
4403 21 90
Pine “Pinus spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 22
Pine “Pinus spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 23 10
Sawlogs of fir “Abies spp.” and spruce “Picea spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared
4403 23 90
Fir “Abies spp.” and spruce “Picea spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 24
Fir “Abies spp.” and spruce “Picea spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 25 10
Sawlogs, coniferous, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 25 90
Coniferous wood in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce; sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 26
Coniferous wood in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce, and rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 41
Dark red meranti, light red meranti and meranti bakau wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 49 10
Sapelli, acajou d’Afrique and iroko in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 49 35
Okoumé and sipo in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 49 85
Tropical wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding acajou d’Afrique, iroko, sapelli, okoumé and sipo; rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 91
Oak “Quercus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 93
Beech “Fagus spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 94
Beech “Fagus spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 95 10
Sawlogs of birch “Betula spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared
4403 95 90
Birch “Betula spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 96
Birch “Betula spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 97
Poplar and aspen “Populus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 98
Eucalyptus “Eucalyptus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 99
Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives, coniferous and tropical wood, oak, beech, birch, poplar, aspen and eucalyptus)
4408 31 11
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, end-jointed, whether or not planed or sanded, of dark red meranti, light red meranti and meranti bakau
4408 31 21
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, of dark red meranti, light red meranti and meranti bakau (excluding end-jointed)
4408 31 25
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, sanded, of dark red meranti, light red meranti and meranti bakau (excluding end-jointed)
4408 31 30
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, whether or not spliced, of dark red meranti, light red meranti and meranti bakau (excluding planed, sanded or end-jointed)
4408 39 15
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, sanded, or end-jointed, whether or not planed, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose
4408 39 21
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose (excluding end-jointed)
4408 39 30
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 6 mm, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose (excluding planed, sanded or end-jointed)
4408 39 55
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, sanded or end-jointed, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose)
4408 39 70
Small boards for the manufacture of pencils, of a thickness of <= 6 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose)
4408 39 85
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 1 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para, palissandre de Rose, and planed, sanded or end-jointed)
4408 39 95
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of > 1 mm but <= 6 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para, palissandre de Rose, and planed, sanded or end-jointed)
4408 90 15
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, sanded or end-jointed (excluding tropical and coniferous wood)
4408 90 35
Small boards for the manufacture of pencils, of wood, of a thickness of <= 6 mm (excluding tropical and coniferous wood)
4408 90 85
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 1 mm (excluding planed, sanded or end-jointed, and tropical and coniferous wood)
4408 90 95
Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of > 1 mm (excluding planed, sanded or end-jointed, and tropical and coniferous wood)
6804 22 12
Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of synthetic or artificial resin, not reinforced (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines)
6804 22 18
Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of synthetic or artificial resin, reinforced (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines)
6804 22 30
Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of ceramics or silicates (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines)
6804 22 50
Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of other than of synthetic or artificial resin, ceramics or silicates (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines)
6804 22 90
Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of agglomerated natural abrasives or ceramics (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines)
8205 10
Hand-operated drilling, threading or tapping hand tools
8205 20
Hammers and sledge hammers with working parts of base metal
8205 30
Planes, chisels, gouges and similar cutting tools for working wood
8205 40
Hand-operated screwdrivers
8205 51
Household hand tools, non-mechanical, with working parts of base metal, n.e.s.
8205 59 10
Hand tools for masons, moulders, cement workers, plasterers and painters, of base metal, n.e.s.
8205 59 80
Hand tools, including glaziers’ diamonds, of base metal, n.e.s.
8205 60
Blowlamps and the like (excluding gas-powered blowlamps)
8205 70
Vices, clamps and the like (excluding accessories for and parts of machine tools or water-jet cutting machines)
8205 90 10
Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks
8205 90 90
Sets of articles of two or more subheadings of heading 8205
8207 19 90
Rock-drilling or earth-boring tools, interchangeable, with working parts of materials other than sintered metal carbide, cermets, diamond or agglomerated diamond
8207 20 10
Interchangeable dies for drawing or extruding metal, with working parts of diamond or agglomerated diamond
8207 20 90
Interchangeable dies for drawing or extruding metal, with working parts of materials other than diamond or agglomerated diamond
8207 30 10
Interchangeable tools for pressing, stamping or punching, for working metal
8207 30 90
Interchangeable tools for pressing, stamping or punching, for working materials other than metal
8207 40 10
Tools for tapping metal, interchangeable
8207 40 30
Tools for threading metal, interchangeable
8207 40 90
Tools for tapping or threading materials other than metal, interchangeable
8207 50 10
Tools for drilling, interchangeable, with working parts of diamond or agglomerated diamond (excluding tools for rock-drilling or earth-boring and tools for tapping)
8207 50 30
Interchangeable masonry drills, with working parts of materials other than diamond or agglomerated diamond
8207 50 50
Tools for drilling metal, interchangeable, with working parts of sintered metal carbide or cermets (excluding tools for tapping)
8207 50 60
Tools for drilling, interchangeable, for working metal, with working parts of high speed steel (excluding tools for tapping)
8207 50 70
Tools for drilling metal, interchangeable, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide, cermets or high speed steel (excluding tools for tapping)
8207 50 90
Tools for drilling, interchangeable, for working materials other than metal, with working parts of materials other than diamond or agglomerated diamond (excluding tools for rock-drilling or earth-boring, wall boring and tools for tapping)
8207 70 31
Interchangeable shank type tools for milling metal, with working parts of materials other than sintered metal carbide or cermets
8207 70 37
Tools for milling, interchangeable, for working metal, with working part of materials other than sintered metal carbide or cermets (excluding shank-type)
8207 90 30
Screwdriver bits of base metal
8207 90 50
Interchangeable gear-cutting tools (excluding milling tools for gear-cutting)
8207 90 71
Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, for working metal, with working parts of sintered metal carbide or cermets, n.e.s.
8207 90 78
Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances or in machine tools, for working materials other than metal, with working part of sintered metal carbides or cermets, n.e.s.
8207 90 91
Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances, or for machine tools, for working metal, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide or cermets, n.e.s.
8209 00 20
Inserts, indexable, for tools, unmounted, of sintered metal carbide or cermets
8209 00 80
Plates, sticks, tips and the like for tools, unmounted, of sintered metal carbides or cermets (excluding indexable inserts)
8402 11
Watertube boilers with a steam production > 45 t/hour
8405 10
Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers (excluding coke ovens, electrolytic process gas generators and carbide lamps)
8406 10
Steam and other vapour turbines for marine propulsion
8406 81
Steam and other vapour turbines, of an output > 40 MW (excluding those for marine propulsion)
8406 82
Steam and other vapour turbines, of an output <= 40 MW (excluding those for marine propulsion)
8410 11
Hydraulic turbines and water wheels, of a power <= 1,000 kW (excluding hydraulic power engines and motors of heading 8412)
8410 13
Hydraulic turbines and water wheels, of a power > 10,000 kW (excluding hydraulic power engines and motors of heading 8412)
8410 90
Parts of hydraulic turbines and water wheels including regulators
8412 31
Pneumatic power engines and motors, linear-acting, “cylinders”
8412 80 10
Steam or other vapour power engines (excluding steam or other vapour generating boilers and turbines)
8412 80 80
Engines and motors, non-electrical (excluding steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines, reaction engines, hydraulic power engines and motors, pneumatic power engines and motors, steam or other vapour power engines and electric motors)
8412 90 20
Parts of reaction engines, n.e.s. (excluding of turbojets)
8412 90 40
Parts of hydraulic power engines and motors, n.e.s.
8412 90 80
Parts of other engines and motors, n.e.s.
8415 20
Air conditioning machines of a kind used for persons, in motor vehicles
8415 81
Air conditioning machines incorporating a refrigerating unit and a valve for reversal of the cooling-heat cycle “reversible heat pumps” (excluding of a kind used for persons in motor vehicles and self-contained or “split-system” window or wall air conditioning machines)
8415 82
Air conditioning machines incorporating a refrigerating unit but without a valve for reversal of the cooling-heat cycle (excluding of a kind used for persons in motor vehicles, and self-contained or “split-system” window or wall air conditioning machines)
8415 90
Parts of air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, n.e.s.
8418 50 11
Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for frozen food storage
8418 50 19
Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for non-frozen food storage
8418 50 90
Refrigerating furniture with a refrigerating unit or evaporator (excluding combined refrigerator-freezers, with separate external doors, household refrigerators, refrigerated show-cases and counters)
8418 91
Furniture designed to receive refrigerating or freezing equipment
8418 99 10
Evaporators and condensers for refrigerating equipment (excluding for household refrigerators)
8418 99 90
Parts of refrigerating or freezing equipment and heat pumps, n.e.s.
8419 11
Instantaneous gas water heaters (excluding boilers or water heaters for central heating)
8419 33
Dryers - lyophilisation apparatus, freeze drying units and spray dryers
8419 35
Other dryers, for wood, paper pulp, paper or paperboard
8419 39
Dryers n.e.s.
8420 10 10
Calendering or other rolling machines, of a kind used in the textile industry
8420 10 30
Calendering or other rolling machines, of a kind used in the paper industry
8420 10 81
Roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits
8420 10 89
Calendering or other rolling machines (excluding of a kind used in the textile or paper industries or for metals or glass, and roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits)
8420 91 10
Cylinders for calendering or other rolling machines, of cast iron (other than for metals or glass)
8420 91 80
Cylinders for calendering or other rolling machines (excluding of cast iron and those for metals or glass)
8422 90 90
Parts of packing or wrapping machinery and of other machinery of heading 8422, n.e.s. (excluding parts of dishwashing machines)
8423 20 10
Scales for continuous weighing of goods on conveyors, using electronic means for gauging weight
8423 20 90
Scales for continuous weighing of goods on conveyors, using non-electronic means for gauging weight
8423 30 10
Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales, using electronic means for gauging weight
8423 30 90
Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales, using non-electronic means for gauging weight
8423 81 21
Check weighers and automatic control machines operating by reference to a pre-determined weight, having weighing capacity <= 30 kg, using electronic means for gauging weight
8423 81 23
Machinery for weighing and labelling pre-packaged goods, having weighing capacity <= 30 kg, using electronic means for gauging weight
8423 81 25
Shop scales, having weighing capacity <= 30 kg, using electronic means for gauging weight (excluding machinery for weighing and labelling pre-packaged goods)
8423 81 29
Weighing machinery having a maximum weighing capacity <= 30 kg, using electronic means for gauging weight, n.e.s
8423 81 80
Weighing machinery having a maximum weighing capacity <= 30 kg, using non-electronic means for gauging weight, n.e.s
8423 82 20
Weighing machinery of a maximum weighing capacity > 30 kg but <= 5,000 kg, using electronic means for gauging weight (excluding machines for weighing motor vehicles, personal weighing machines, scales for continuous weighing of goods on conveyors, constant weight scales and scales for discharging a pre-determined weight of material into a bag or container, also hopper scales)
8423 82 81
Check weighers and automatic control machines operating by reference to a pre-determined weight, of a maximum weighing capacity > 30 kg but <= 5,000 kg, using non-electronic means for gauging weight
8423 82 89
Weighing machinery of a maximum weighing capacity > 30 kg but <= 5,000 kg, n.e.s.
8423 89 20
Weighing machinery of a maximum weighing capacity > 5,000 kg, using electronic means for gauging weight
8423 89 80
Weighing machinery of a maximum weighing capacity > 5,000 kg, using non-electronic means for gauging weight
8423 90 10
Parts of weighing machinery of subheadings 8423 20 10, 8423 30 10, 8423 81 21, 8423 81 23, 8423 81 25, 8423 81 29, 8423 82 20 or 8423 89 20 n.e.s.
8423 90 90
Weighing machine weights of all kinds; parts of weighing machinery, n.e.s.
8424 20
Spray guns and similar appliances (other than electrical machines, appliances and other devices for spraying molten metals or metal carbides of heading 8515, sand blasting machines and similar jet projecting machines)
8424 30 01
Water cleaning appliances with built-in motor, with heating device
8424 30 08
Water cleaning appliances with built-in motor, without heating device
8424 30 10
Steam or sand blasting machines and similar jet projecting machines, compressed air operated
8424 30 90
Steam or sand blasting machines and similar jet projecting machines (excluding compressed air operated and water cleaning appliances with built-in motor and appliances for cleaning special containers)
8425 19
Pulley tackle and hoists (other than skip hoists or hoists of a kind used for raising vehicles), non-powered by electric motor
8425 31
Winches and capstans powered by electric motor
8425 39
Winches and capstans, non-powered by electric motor
8425 41
Built-in jacking systems of a type used in garages
8425 42
Jacks and hoists, hydraulic (excluding built-in jacking systems used in garages)
8425 49
Jacks and hoists of a kind used for raising vehicles, not hydraulic
8426 11
Overhead travelling cranes on fixed support
8426 19
Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes and mobile lifting frames (excluding overhead travelling cranes on fixed support, mobile lifting frames on tyres, straddle carriers and portal or pedestal jib cranes)
8426 20
Tower cranes
8426 30
Portal or pedestal jib cranes
8426 41
Mobile cranes and works trucks fitted with a crane, self-propelled, on tyres (excluding wheel-mounted cranes, mobile lifting frames on tyres and straddle carriers)
8426 49
Mobile cranes and works trucks fitted with a crane, self-propelled (excluding those on tyres and straddle carriers)
8426 91 10
Hydraulic cranes designed for the loading and unloading of the vehicle
8426 91 90
Cranes designed for mounting on road vehicles (excluding hydraulic cranes designed for the loading and unloading of vehicles)
8427 10 10
Self-propelled works trucks powered by an electric motor, with a lifting height >= 1 m
8427 10 90
Self-propelled works trucks powered by an electric motor, with a lifting height < 1 m
8427 90
Works trucks fitted with lifting or handling equipment, not self-propelled
8429 11
Self-propelled bulldozers and angledozers, track laying
8429 20
Self-propelled graders and levellers
8429 30
Self-propelled scrapers
8429 40 10
Self-propelled roadrollers, vibratory
8429 40 30
Self-propelled roadrollers (other than vibratory)
8429 40 90
Self-propelled tamping machines (excluding roadrollers)
8429 51 10
Self-propelled front-end shovel loaders specially designed for underground use
8429 51 91
Self-propelled front-end crawler shovel loaders (other than specially designed for underground use)
8429 51 99
Self-propelled front-end shovel loaders (other than specially designed for underground use or crawler shovel loaders)
8429 52 10
Self-propelled track-laying excavators, with a 360° revolving superstructure
8429 52 90
Self-propelling mechanical shovels with a 360° revolving superstructure (other than track-laying excavators)
8430 20
Snowploughs and snowblowers (excluding those mounted on railway wagons, motor vehicle chassis or lorries)
8430 61
Tamping or compacting machinery, not self-propelled (excluding hand-operated tools)
8433 11 10
Electric motor mowers for lawns, parks or sports grounds, with the cutting device rotating in a horizontal plane
8433 11 51
Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane, with a seat
8433 11 59
Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane, without a seat
8433 11 90
Mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane not self-propelled
8433 19 10
Electric motor mowers for lawns, parks or sports grounds, with the cutting device rotating in a vertical plane or with cutter bars
8433 19 51
Self-propelled motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, with a seat
8433 19 59
Self-propelled motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, without a seat
8433 19 70
Motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, not self-propelled
8433 19 90
Mowers for lawns, parks or sports grounds, without motor
8433 20 10
Motor mowers (excluding mowers for lawns, parks or sports grounds)
8433 20 90
Mowers (excluding mowers designed to be carried on or hauled by a tractor, mowers for lawns, parks or sports grounds, motor mowers and combine harvester-threshers)
8439 20
Machinery for making paper or paperboard
8439 91
Parts of machinery for making pulp of fibrous cellulosic material, n.e.s.
8439 99
Parts of machinery for making or finishing paper or paperboard, n.e.s.
8440 10 10
Folding machines for bookbinding
8440 10 20
Collating machines and gathering machines for bookbinding
8440 10 30
Sewing, wire stitching and stapling machines, including book-sewing machines, for bookbinding
8440 10 40
Unsewn “perfect” binding machines
8440 10 90
Bookbinding machinery (excluding machinery of heading 8441, general-purpose presses, printing machinery of heading 8443 and machines of uses ancillary to printing, folding machines, collating machines, gathering machines, sewing, wire stitching and stapling machines and unsewn binding machines)
8441 10 10
Combined reel slitting and re-reeling machines, for making up paper pulp, paper or paperboard
8441 10 20
Slitting and cross cutting machines, for making up paper pulp, paper or paperboard (excluding combined reel slitting and re-reeling machines)
8441 10 30
Guillotines for paper or paperboard
8441 10 70
Cutting machines for paper or paperboard (other than bookbinding machinery of heading 8440, combined reel slitting and re-reeling machines, other slitting and cross-cutting machines and guillotines)
8441 20
Machines for making bags, sacks or envelopes out of paper pulp, paper or paperboard (excluding sewing machines and eyeletting machines)
8441 40
Machines for moulding articles in paper pulp, paper or paperboard (excluding drying equipment)
8441 80
Machinery for making up paper pulp, paper or paperboard, n.e.s.
8441 90 10
Parts of cutting machines for making up paper pulp, paper or paperboard, n.e.s.
8441 90 90
Parts of machinery for making up paper pulp, paper or paperboard, n.e.s.
8442 50
Printing plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes, e.g. planed, grained or polished
8443 14
Letterpress printing machinery, reel fed (excluding flexographic printing machinery)
8443 19 20
Printing machinery for printing textile materials (excluding offset, flexographic, letterpress and gravure printing machinery)
8443 19 40
Printing machinery for use in the production of semiconductors
8443 19 70
Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 (excluding machinery for printing textile materials, those for use in the production of semiconductors, ink jet printing machines, hectograph or stencil duplicating machines, addressing machines and other office printing machines of heading 8469 to 8472 and offset, flexographic, letterpress and gravure printing machinery)
8443 99 10
Electronic assemblies of printers, copying machines and facsimile machines (excluding of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442)
8443 99 90
Parts and accessories of printers, copying machines and facsimile machines, n.e.s. (excluding electronic assemblies and of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442)
8445 11
Carding machines for preparing textile fibres
8445 12
Combing machines for preparing textile fibres
8445 13
Drawing or roving machines
8445 19
Machines for preparing textile fibres (excluding carding, combing, drawing or roving machines)
8445 20
Textile spinning machines (excluding extruding and drawing or roving machines)
8445 30
Textile doubling or twisting machines
8445 40
Textile winding, including weft-winding, or reeling machines
8445 90
Machines for producing textile yarns and machines for preparing textile yarns for use on machines of heading 8446 or 8447 (excluding machines of heading 8444 and spinning, doubling or twisting machines)
8446 10
Weaving machines for weaving fabrics of a width <= 30 cm
8446 21
Power looms for weaving fabrics of a width > 30 cm, shuttle type
8446 29
Hand looms for weaving fabrics of a width > 30 cm, shuttle type
8446 30
Weaving machines for weaving fabrics of a width > 30 cm, shuttleless type
8447 11
Circular knitting machines, with cylinder diameter <= 165 mm
8447 12
Circular knitting machines, with cylinder diameter > 165 mm
8447 20 20
Warp knitting machines, including Raschel type, and stitch-bonding machines
8447 20 80
Flat knitting machines (excluding warp knitting machines, including Raschel type)
8447 90
Machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting (excluding chain or blanket stitch machines)
8448 20
Parts and accessories of machines for extruding, drawing, texturing or cutting man-made textile materials or of their auxiliary machinery, n.e.s.
8448 31
Card clothing for machines for preparing textile fibres
8448 32
Parts and accessories of machines for preparing textile fibres, n.e.s. (other than card clothing)
8448 39
Parts and accessories of machines of heading 8445, n.e.s.
8448 59
Parts and accessories of machines of heading 8447, n.e.s.
8449
Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats; parts thereof (excluding machinery for preparing fibres for felt and calendars)
8451 40
Machines for washing, bleaching or dyeing textile yarns, fabrics or made-up textile articles (excluding household or laundry-type washing machines)
8451 50
Machines for reeling, unreeling, folding, cutting or pinking textile fabrics
8451 80 10
Machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support (excluding calendars and general purpose presses)
8451 80 30
Machinery for dressing or finishing textile yarns, fabrics or other made-up textile articles (excluding machinery for dressing or finishing felt, and calendars and general purpose presses)
8451 80 80
Machinery for coating or impregnating textile yarns, fabrics or other made-up textile articles (excluding calendars and general purpose presses)
8453 20
Machinery for making or repairing footwear of hides, skins or leather (excluding sewing machines)
8454 20
Ingot moulds and ladles, of a kind used in metallurgy or in metal foundries
8454 30 10
Machines for casting under pressure of a kind used in metallurgy or in metal foundries
8454 30 90
Casting machines of a kind used in metallurgy or in metal foundries (excluding machines for casting under pressure)
8454 90
Parts of converters, ladles, ingot moulds and casting machines of a kind used in metallurgy or in metal foundries, n.e.s.
8455 10
Mills for rolling metal tubes
8455 21
Hot or combination hot and cold metal-rolling mills (excluding tubes mills)
8455 22
Cold-rolling mills for metal (excluding tube mills)
8455 30 10
Rolls for metal-rolling mills, of cast iron
8455 30 31
Hot-rolling work-rolls; hot-rolling and cold-rolling back-up rolls, of open-die forged steel, for metal
8455 30 39
Cold-rolling work-rolls, for metal, of open-die forged steel
8455 30 90
Rolls for metal-rolling mills, of cast or wrought steel
8455 90
Parts of metal-rolling mills, n.e.s.
8457 10 10
Horizontal machining centres for working metal
8457 10 90
Machining centres for working metal (excluding horizontal machining centres)
8457 20
Unit construction machines “single station”, for working metal
8457 30 10
Multi-station transfer machines for working metal, numerically controlled
8457 30 90
Multi-station transfer machines for working metal, not numerically controlled
8459 21
Drilling machines for working metal, numerically controlled (excluding way-type unit head machines)
8459 29
Drilling machines for working metal, not numerically controlled (excluding way-type unit head machines and hand-operated machines)
8459 31
Boring-milling machines for metals, numerically controlled (excluding way-type unit head machines)
8459 39
Boring-milling machines for metals, not numerically controlled (excluding way-type unit head machines)
8459 41
Boring machines for metals, numerically controlled (excluding way-type unit head machines and boring-milling machines)
8459 49
Boring machines for metals, not numerically controlled (excluding way-type unit head machines and boring-milling machines)
8459 51
Milling machines for metals, knee-type, numerically controlled
8459 59
Milling machines for metals, knee-type, not numerically controlled
8460 12
Flat-surface grinding machines for finishing metal, numerically controlled
8460 19
Flat-surface grinding machines for finishing metal, not numerically controlled
8460 22
Centreless grinding machines for finishing metal, numerically controlled (other than gear finishing machines)
8460 23
Cylindrical grinding machines for finishing metal, numerically controlled (excluding gear finishing machines and centreless machines)
8460 24
Grinding machines for finishing metal, numerically controlled (excluding flat-surface, cylindrical and gear grinding machines)
8460 29 10
Grinding machines for cylindrical metal surfaces, not numerically controlled (excluding gear finishing machines)
8460 29 90
Grinding machines for finishing metal, not numerically controlled (excluding flat-surface, cylindrical and gear grinding machines)
8460 31
Sharpening “tool or cutter grinding” machines, numerically controlled
8460 39
Sharpening “tool or cutter grinding” machines, not numerically controlled
8460 40 10
Honing or lapping machines, for finishing metals, metal carbides or cermets, numerically controlled (other than gear finishing machines)
8460 40 90
Honing or lapping machines, for finishing metals, metal carbides or cermets, not numerically controlled (other than gear finishing machines)
8460 90
Machines for deburring, polishing or otherwise finishing metal or cermets (excluding grinding, sharpening, honing and lapping machines and machines for working in the hand)
8462 11 10
Closed die forging machines - Numerically controlled
8462 11 90
Closed die forging machines - Other
8462 19 10
Other hot forming machines for forging, die forging (including presses) and hot hammers - Numerically controlled
8462 19 90
Other hot forming machines for forging, die forging (including presses) and hot hammers - Other
8462 22 10
Profile forming machines - Numerically controlled
8462 22 90
Profile forming machines – Other
8462 23
Numerically controlled press brakes
8462 24
Numerically controlled panel benders
8462 25
Numerically controlled roll forming machines
8462 26
Other numerically controlled bending, folding, straightening or flattening machines
8462 29
Other bending, folding, straightening or flattening machines (including press brakes) for flat products
8462 32 10
Slitting lines and cut-to-length lines - Numerically controlled
8462 32 90
Slitting lines and cut-to-length lines - Other
8462 33
Shearing machines - Numerically controlled
8462 39
Other slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines
8462 42
Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines - Numerically controlled
8462 49
Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines – Other
8462 51
Machines for working tube, pipe, hollow section and bar (excluding presses) - Numerically controlled
8462 59
Machines for working tube, pipe, hollow section and bar (excluding presses) - Other
8462 61 10
Hydraulic presses - Numerically controlled
8462 61 90
Hydraulic presses - Other
8462 62 10
Mechanical presses - Numerically controlled
8462 62 90
Mechanical presses - Other
8462 63 10
Servo-presses - Numerically controlled
8462 63 90
Servo-presses - Other
8462 69 10
Other cold metal working presses - Numerically controlled
8462 69 90
Other cold metal working presses - Other
8462 90 10
Other - Numerically Controlled
8462 90 90
Other - Other
8466 94
Parts and accessories for machine tools for working metal without removing material, n.e.s.
8468 10
Hand-held blow pipes, gas-operated, for soldering, brazing or welding
8468 20
Gas-operated machinery and apparatus for soldering, brazing, welding or surface tempering (excluding hand-held blow pipes)
8468 80
Machinery and apparatus for welding, not gas-operated (excluding electric machines and apparatus of heading 8515)
8468 90
Parts of machinery and apparatus for soldering, brazing, welding or surface tempering, non-electric, n.e.s.
8474 20
Crushing or grinding machines for solid mineral substances
8474 31
Concrete or mortar mixers (excluding those mounted on railway wagons or lorry chassis)
8474 32
Machines for mixing mineral substances with bitumen
8474 90 10
Parts of machinery of heading 8474, of cast iron or cast steel
8474 90 90
Parts of machinery of heading 8474 (excluding of cast iron or cast steel)
8475 10
Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes
8476 21
Automatic beverage-vending machines incorporating heating or refrigerating devices
8476 29
Automatic beverage-vending machines, without heating or refrigerating devices
8476 81
Automatic goods-vending machines incorporating heating or refrigerating devices (excluding automatic beverage-vending machines)
8476 89 10
Money-changing machines
8476 89 90
Automatic goods-vending machines, without heating or refrigerating devices (excluding automatic beverage-vending machines and money-changing machines)
8476 90 10
Parts of money-changing machines, n.e.s.
8476 90 90
Parts of automatic goods-vending machines, n.e.s. (excluding of money-changing machines)
8478 10
Machinery for preparing or making up tobacco (excluding dryers and other heating equipment, centrifuges and filter presses)
8478 90
Parts of machinery for preparing or making up tobacco, n.e.s.
8479 40
Rope or cable-making machines (excluding twisting machines of the type used in spinning mills)
8479 71
Passenger boarding bridges, of a kind used in airports
8479 79
Passenger boarding bridges (excluding of a kind used in airports)
8479 81
Machinery for treating metal, including electric wire coil-winders, n.e.s. (excluding industrial robots, furnaces, dryers, spray guns and the like, high-pressure cleaning equipment and other jet cleaners, rolling mills or machines, machine tools and rope or cable-making machines)
8480 10
Moulding boxes for metal foundry
8480 41
Injection or compression-type moulds for metal or metal carbides (excluding moulds of graphite or other carbons and ceramic or glass moulds)
8480 49
Moulds for metal or metal carbides (excluding moulds of graphite or other carbons, ceramic or glass moulds, linotype moulds or matrices, injection or compression-type moulds and ingot moulds)
8480 50
Moulds for glass (excluding moulds of graphite or other carbons and ceramic moulds)
8480 71
Injection or compression-type moulds for rubber or plastics
8480 79
Moulds for rubber or plastics (other than injection or compression types)
8482 30
Spherical roller bearings
8482 50
Other cylindrical roller bearings, including cage and roller assemblies
8482 80
Roller bearings, including combined ball-roller bearings (excluding ball bearings, tapered roller bearings, including cone and tapered roller assemblies, spherical roller bearings, needle and cylindrical roller bearings)
8487 10 10
Ships’ or boats’ propellers and blades therefor, of bronze
8487 10 90
Ships’ or boats’ propellers and blades therefor (excluding those of bronze)
8487 90 40
Parts of machinery of Chapter 84, not intended for a specific purpose, of cast iron, n.e.s.
8487 90 51
Parts of machinery of Chapter 84, not intended for a specific purpose, of cast steel, n.e.s.
8487 90 57
Parts of machinery of Chapter 84, not intended for a specific purpose, of open-die forged or closed-die forged iron or steel, n.e.s.
8487 9059
Parts of machinery of Chapter 84, not intended for a specific purpose, of iron or steel, n.e.s. (other than cast, open-die or closed-die forged)
8487 90 90
Machinery parts of Chapter 84, not intended for a specific purpose, n.e.s.
8502 11 20
Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output <= 7.5 kVA
8502 11 80
Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 7.5 kVA but <= 75 kVA
8502 12
Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 75 kVA but <= 375 kVA
8502 20 20
Generating sets with spark-ignition internal combustion piston engine, of an output <= 7.5 kVA
8502 20 40
Generating sets with spark-ignition internal combustion piston engine, of an output > 7.5 kVA but <= 375 kVA
8502 20 60
Generating sets with spark-ignition internal combustion piston engine, of an output > 375 kVA but <= 750 kVA
8502 20 80
Generating sets with spark-ignition internal combustion piston engine, of an output > 750 kVA
8503 00 10
Non-magnetic retaining rings for electric motors and electric generating sets
8503 00 91
Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s., of cast iron or cast steel
8503 00 99
Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. (excluding non-magnetic retaining rings and of cast iron or cast steel)
8504 10 20
Inductors, whether or not connected with a capacitor
8504 10 80
Ballasts for discharge lamps or tubes (excluding inductors, whether or not connected with a capacitor)
8504 21
Liquid dielectric transformers, having a power handling capacity <= 650 kVA
8504 22 10
Liquid dielectric transformers, having a power handling capacity > 650 kVA but <= 1,600 kVA
8504 22 90
Liquid dielectric transformers, having a power handling capacity > 1,600 kVA but <= 10,000 kVA
8504 23
Liquid dielectric transformers, having a power handling capacity > 10,000 kVA
8504 31 21
Measuring transformers for voltage measurement, having a power handling capacity <= 1 kVA
8504 31 29
Measuring transformers having a power handling capacity <= 1 kVA (other than for voltage measurement)
8504 31 80
Transformers having a power handling capacity <= 1 kVA (excluding liquid dielectric transformers)
8504 32
Transformers, having a power handling capacity > 1 kVA but <= 16 kVA (excluding liquid dielectric transformers)
8504 40 60
Accumulator chargers
8504 40 83
Rectifiers
8504 40 85
Inverters having a power handling capacity not exceeding 7.5 kVA
8504 40 86
Inverters having a power handling capacity exceeding 7.5 kVA
8504 40 95
Other static converters
8504 50
Inductors (excluding inductors for discharge lamps or tubes)
8504 90 11
Ferrite cores for transformers and inductors
8504 90 13
Steel laminations and cores, whether or not stacked or wound, for transformers and inductors
8504 90 17
Parts of transformers and inductors, n.e.s. (excluding ferrite cores and steel laminations and cores)
8504 90 90
Parts of static converters, n.e.s.
8505 11
Permanent magnets and articles intended to become permanent magnets after magnetisation; of metal
8507 10 20
Lead-acid accumulators of a kind used for starting piston engines (starter batteries), working with liquid electrolyte (excluding spent)
8507 10 80
Lead-acid accumulators of a kind used for starting piston engines (starter batteries), working with non-liquid electrolyte (excluding spent)
8507 2020
Lead-acid accumulators, working with liquid electrolyte (excluding spent and starter batteries)
8507 20 80
Lead-acid accumulators, working with non-liquid electrolyte (excluding spent and starter batteries)
8507 50
Nickel-metal hydride accumulators (excluding spent)
8507 60
Lithium-ion accumulators (excluding spent)
8507 80
Other electric accumulators (excluding spent and lead-acid, nickel-cadmium, nickel-metal hydride and lithium-ion accumulators)
8507 90 30
Separators for electric accumulators (excluding separators of vulcanised rubber other than hard rubber or of textiles)
8507 90 80
Parts of electric accumulators (excluding separators)
8514 11
Resistance heated furnaces and ovens - Hot isostatic presses
8514 19 80
Other resistance heated furnaces and ovens – Other
8514 31 10
Electron beam furnaces - Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
8514 31 90
Electron beam furnaces – Other
8514 32 10
Plasma and vacuum arc furnaces - Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
8514 32 90
Plasma and vacuum arc furnaces – Other
8514 39 10
Other furnaces and ovens, other - Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
8514 39 90
Other furnaces and ovens, other – Other
8514 90 30
Other furnaces and ovens of subheadings 8514 31 10, 8514 32 10 and 8514 39 10
8514 90 70
Parts of electric industrial or laboratory furnaces and ovens, including of those functioning by induction or dielectric loss, and of industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss, n.e.s.
8516 29 10
Liquid filled electric radiators, for space-heating and soil-heating
8516 32
Electro-thermic hairdressing apparatus (excluding hairdryers)
8516 33
Electric hand-drying apparatus
8516 40
Electric smoothing irons
852589
Other television cameras, digital cameras and video camera recorders
852910
Aerials and aerial reflectors of all kinds; parts suitable for use therewith
8529 90 18
Parts suitable for use solely or principally with the apparatus of headings 8524 to 8528, (excluding aerials, aerial fitters and separators, organic-light emitting modifiers and organic light-emitting diode panels)
8530 10
Electrical signalling, safety or traffic control equipment for railways or tramways (excluding mechanical or electromechanical equipment of heading 8608)
8530 80
Electrical signalling, safety or traffic control equipment (excluding that for railways or tramways and mechanical or electromechanical equipment of heading 8608)
8533 10
Fixed carbon resistors, composition or film types (excluding heating resistors)
8533 21
Fixed electrical resistors for a power handling capacity <= 20 W (excluding heating resistors)
8533 31
Wirewound variable electrical resistors, including rheostats and potentiometers, for a power handling capacity <= 20 W (excluding heating resistors)
8533 39
Wirewound variable electrical resistors, including rheostats and potentiometers, for a power handling capacity > 20 W (excluding heating resistors)
8533 40 10
Electrical variable resistors, including rheostats and potentiometers, for a power handling capacity <= 20 W (excluding wirewound variable resistors and heating resistors)
8533 40 90
Electrical variable resistors, including rheostats and potentiometers, for a power handling capacity > 20 W (excluding wirewound variable resistors and heating resistors)
8533 90
Parts of electrical resistors, including rheostats and potentiometers, n.e.s.
8534 00 11
Multilayer printed circuits, consisting only of conductor elements and contacts
8534 00 19
Printed circuits consisting only of conductor elements and contacts (excluding multiple printed circuits)
8534 00 90
Printed circuits consisting of conductor elements, contacts and other passive elements (excluding those with passive and active elements)
8535 10
Fuses for a voltage > 1,000 V
8537 10
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517, for a voltage not exceeding 1,000V
8539 10
Sealed beam lamp units
8539 21 30
Tungsten halogen filament lamps for motorcycles or other motor vehicles (excluding sealed beam lamp units)
8539 21 92
Tungsten halogen filament lamps for a voltage > 100 V
8539 21 98
Tungsten halogen filament lamps for a voltage <= 100 V (excluding those for motorcycles or other motor vehicles)
8539 22 10
Reflector filament lamps of a power <= 200 W and for a voltage > 100 V (excluding tungsten halogen filament lamps)
8539 22 90
Filament lamps of a power <= 200 W and for a voltage > 100 V (excluding tungsten halogen lamps, reflector lamps and ultraviolet or infra-red lamps)
8539 29 30
Filament lamps for motorcycles or other motor vehicles (excluding tungsten halogen lamps)
8539 29 92
Filament lamps for a voltage > 100 V (excluding tungsten halogen lamps, lamps of a power <= 200 W, and ultraviolet or infra-red lamps)
8539 29 98
Filament lamps for a voltage <= 100 V (excluding tungsten halogen lamps and lamps for motorcycles and other motor vehicles)
8539 31 10
Discharge lamps, fluorescent, hot cathode, with double ended cap
8539 31 90
Discharge lamps, fluorescent, hot cathode (excluding with double ended cap)
8539 32 20
Mercury or sodium vapour lamps
8539 32 90
Metal halide lamps
8539 39 20
Cold-cathode fluorescent lamps “CCFLs” for backlighting of flat panel displays
8539 39 80
Discharge lamps (excluding hot-cathode fluorescent lamps, mercury or sodium vapour lamps, metal halide lamps, ultraviolet lamps, and cold-cathode fluorescent lamps “CCFLs” for backlighting of flat panel displays)
8539 49
Ultraviolet or infra-red lamps
8539 90 10
Lamp bases for filament or discharge lamps and other lamps of heading 8539, n.e.s.
8539 90 90
Parts of electric filament or discharge lamps, sealed beam lamp units, ultraviolet or infra-red lamps, arc lamps and LED lamps, n.e.s.
8540 11
Cathode ray television picture tubes, including video monitor cathode ray tubes, colour
8540 12
Cathode ray television picture tubes, including video monitor cathode ray tubes, black and white or other monochrome, with a screen width-to-height ratio of < 1.5 and a diagonal measurement of the screen > 72 cm
8540 40
Data/graphic display tubes, monochrome; data/graphic display tubes, colour, with a phosphor dot screen pitch of < 0.4 mm (excluding photo cathode tubes and cathode ray tubes)
8541 10
Diodes, other than photosensitive or light-emitting diodes (LED)
8541 21
Transistors with a dissipation rate < 1 W (excluding photosensitive transistors)
8541 29
Other transistors, other than photosensitive transistors
8541 30
Thyristors, diacs and triacs (excluding photosensitive semiconductor devices)
8541 41
Light-emitting diodes (LED)
8541 42
Photovoltaic cells not assembled in modules or made up into panels
8541 430
Photovoltaic cells assembled in modules or made up into panels
8541 49
Other photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes (LED)
8541 51
Semiconductor-based transducers
8541 59
Other semiconductor devices – other
8541 60
Mounted piezoelectric crystals
8541 90
Parts of diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, light emitting diodes and mounted piezoelectric crystals, n.e.s.
8542 31
Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits
8542 32
Memories
8542 33
Amplifiers
8542 39
Other Electronic Integrated Circuits
8542 90
Parts of electronic integrated circuits, n.e.s.
8545 11
Electrodes of graphite or other carbon, for furnaces
8545 19
Electrodes of graphite or other carbon, for electrical purposes (excluding those used for furnaces)
8545 20
Carbon brushes for electrical purposes
8545 90 10
Heating resistors for electrical purposes, of graphite or other carbon
8545 90 90
Articles of graphite or other carbon, for electrical purposes (excluding electrodes, carbon brushes and heating resistors)
8548
Electrical parts of machinery or apparatus, not specified or included elsewhere in Chapter 85
8546 10
Electrical insulators of glass (excluding insulating fittings)
8546 20
Electrical insulators of ceramics (excluding insulating fittings)
8546 90 10
Electrical insulators of plastics (excluding insulating fittings)
8546 90 90
Electrical insulators (excluding those of glass, ceramics or plastics and insulating fittings)
8547 10
Insulating fittings for electrical purposes, of ceramics
8547 20
Insulating fittings for electrical purposes, of plastics
8601 20
Rail locomotives powered by electric accumulators
8602 10
Diesel-electric locomotives
8606 10
Railway or tramway tank wagons and the like (excluding self-propelled)
8606 30
Railway or tramway self-discharging goods vans and wagons (excluding tank wagons and the like and insulated or refrigerated goods vans and wagons)
8606 91 10
Railway or tramway goods vans and wagons, covered and closed, specially designed for the transport of highly radioactive materials (excluding tank wagons and the like and insulated, refrigerated or self-discharging goods vans and wagons)
8606 91 80
Railway or tramway goods vans and wagons, covered and closed (excluding those specially designed for the transport of highly radioactive materials, tank wagons and the like and self-discharging goods vans and wagons)
8606 99
Railway or tramway goods vans and wagons (excluding those specially designed for the transport of highly radioactive materials, tank wagons and the like, insulated, refrigerated or self-discharging goods vans and wagons and open goods vans and wagons with non-removable sides of a height > 60 cm)
8608
Railway or tramway track fixtures and fittings (excluding sleepers of wood, concrete or steel, sections of track and other track fixtures not yet assembled and railway or tramway track construction material); mechanical, including electromechanical, signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing
8609 00 10
Containers with an anti-radiation lead covering, for the transport of radioactive materials
8609 00 90
Containers specially designed and equipped for carriage by one or more modes of transport (excluding those with an anti-radiation lead covering for the transport of radioactive materials)
8901 20 10
Sea-going tankers
8901 20 90
Tankers (excluding sea-going tankers)
8901 30 10
Sea-going refrigerated vessels (excluding tankers)
8901 30 90
Refrigerated vessels (excluding sea-going vessels and tankers)
8904 00 10
Tugs, sea-going and for inland waterways
8904 00 91
Sea-going pusher craft
8904 00 99
Pusher craft (excluding sea-going)
8905 10 10
Sea-going dredgers
8905 10 90
Dredgers (excluding sea-going)
8907 10
Inflatable rafts
8907 90
Rafts, tanks, coffer-dams, landing stages, buoys, beacons and other floating structures (excluding inflatable rafts, vessels of heading 8901 to 8906 and floating structures for breaking up)
8908
Vessels and other floating structures for breaking up
9001 10 10
Image conductor cables of optical fibres (excluding cables made up of individually sheathed fibres of heading 8544)
9001 10 90
Optical fibres, optical fibre bundles and cables (excluding made up of individually sheathed fibres of heading 8544 and image conductor cables)
9001 20
Sheets and plates of polarising material
9006 30
Cameras specially designed for underwater use, for aerial survey or for medical or surgical examination of internal organs; comparison cameras for forensic or criminological purposes
9008 50
Image projectors, and photographic enlargers and reducers (excluding cinematographic and parts)
9008 90
Parts and accessories for image projectors, photographic enlargers and reducers, n.e.s.
9010 50
Apparatus and equipment for photographic or cinematographic laboratories, n.e.s.; negatoscopes
9010 60
Projection screens
9010 90 20
Parts and accessories of apparatus and equipment of subheadings 9010 50 or 9010 60 , n.e.s.
9010 90 80
Parts and accessories for apparatus and equipment for automatically developing photographic or cinematographic film or paper in rolls or for automatically exposing developed film to rolls of photographic paper, n.e.s.
9015 20
Theodolites and tachymeters (tacheometers)
9016 00 10
Balances of a sensitivity of 50 mg or better, with or without weights
9016 00 90
Parts and accessories for balances of a sensitivity of 50 mg or better, n.e.s.
9017 10 10
Plotters as drafting machines
9017 10 90
Drafting tables and machines, whether or not automatic (excluding plotters)
9017 20 05
Plotters as drawing or marking-out instruments
9017 20 10
Drawing instruments (excluding drafting tables and machines, plotters)
9017 20 39
Marking-out instruments
9017 20 90
Mathematical calculating instruments, including slide rules, disc calculators and the like (excluding calculating machines)
9017 30
Micrometers, callipers and gauges (excluding gauges without adjustable devices of subheading 9031 80)
9017 80 10
Measuring rods and tapes and divided scales
9017 89
Hand-held instruments for measuring length, n.e.s.
9017 90
Parts and accessories for drawing, marking-out or mathematical calculating instruments and instruments for measuring length for use in the hand, n.e.s.
9024 10 20
Machines and appliances for universal testing of mechanical properties of metals or for tensile testing of metals
9024 10 40
Machines and appliances for testing the hardness of metals
9024 10 80
Machines and appliances for testing the mechanical properties of metals (excluding for universal, tensile or hardness testing)
9024 80
Machines and appliances for testing the mechanical properties of materials (excluding metals)
9024 90
Parts and accessories for machines and appliances for testing the mechanical properties of materials, n.e.s.
9025 19
Other thermometers and pyrometers, not combined with other instruments
9025 80 20
Barometers, not combined with other instruments
9025 80 80
Hydrometers, areometers and similar floating instruments, hygrometers and psychrometers, whether or not combined with each other or with thermometers or barometers, non-electronic
9026 10 21
Electronic flow meters for measuring or checking the flow or level of liquids (excluding meters and regulators)
9026 10 29
Electronic instruments and apparatus for measuring or checking the flow or level of liquids (excluding flow meters, meters and regulators)
9026 10 81
Flow meters for measuring or checking the flow or level of liquids, non-electronic (excluding meters and regulators)
9026 10 89
Instruments and apparatus for measuring or checking the flow or level of liquids, non-electronic (excluding flow meters, meters and regulators)
9026 20 20
Instruments and apparatus for measuring or checking pressure - electronic
9026 20 40
Instruments and apparatus for measuring or checking pressure - Spiral or metal diaphragm type pressure gauges
9026 20 80
Instruments and apparatus for measuring or checking pressure - other, n.e.s.
9026 80 20
Electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s.
9026 80 80
Non-electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s.
9026 90
Parts and accessories for instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases, n.e.s.
9027 89 10
Exposure meters
9027 89 30
pH meters, rH meters and other apparatus for measuring conductivity
9027 89 90
Instruments and apparatus for physical or chemical analysis or for determining surface tension or the like, or for measuring heat or sound, n.e.s.
9028 10
Gas meters, including calibrating meters therefor
9028 20
Liquid meters, including calibrating meters therefor
9028 30 11
Electricity supply or production meters for alternating current, single-phase, including calibrating meters therefor
9028 30 19
Electricity supply or production meters for alternating current, multi-phase, including calibrating meters therefor
9028 30 90
Electricity supply or production meters for continuous current, including calibrating meters therefor
9028 90 10
Parts and accessories for electricity meters, n.e.s.
9028 90 90
Parts and accessories for gas or liquid meters, n.e.s.
9029 20 31
Speed indicators for land vehicles
9029 20 38
Speed indicators and tachometers (excluding for land vehicles)
9029 2090
Stroboscopes
9029 90
Parts and accessories for revolution counters, production counters, taximeters, milometers, pedometers and the like, speed indicators and tachometers, and stroboscopes, n.e.s.
9031 90
Parts and accessories for instruments, appliances and machines for measuring and checking, n.e.s.
9033 00 10
Light-emitting diode “LED” backlight modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays “LCDs” of apparatus of Chapter 90
9033 00 90
Parts and accessories for machines, appliances, instruments or other apparatus in Chapter 90, n.e.s.
”

---
Source: https://www.legislation.gov.uk/uksi/2025/504/schedule/3 (the official version)
Page: https://openlegislation.uk/russia-sanctions-eu-exit-amendment-regulations-2025/schedule-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.