Paragraph 14 Dynamic spear sampler

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

Sch 5, para 4 am by Seed (Registration, Licensing and Enforcement) 2004 reg 2(1), (4)(a)
Sch 5, para 6 am by Seed (Registration, Licensing and Enforcement) 2004 reg 2(1), (4)(b)
Sch. 5 para. 13 Table word substituted by Seed 2007 reg. 8(a)
Sch. 5 para. 13 Table words inserted by Oil and Fibre Plant Seed 2003 reg. 3(3)

In the table set out in paragraph 13 references to type A, B, C and D instruments shall be construed as referring to instruments having a point length (a), shoulder length (b), boss length (c), aperture length (d), aperture width (e), bore width (f) and outside diameter (g) as shown in the diagram below of the dimensions specified in the corresponding entries in the following table—

Type of Instrument	Point length	Shoulder length	Boss length	Aperture length	Aperture width	Bore Width	Outside diameter
	mm	mm	mm	mm	mm	mm	mm
	(a)	(b)	(c)	(d)	(e)	(f)	(g)
A	42	7	8	20	8	10	12
B	85	12	10	33	11	13	15
C	82	12	13	40	15	17	19
D	78	15	15	40	18	20	22

Type of Instrument	Point length	Shoulder length	Boss length	Aperture length	Aperture width	Bore Width	Outside diameter
	mm	mm	mm	mm	mm	mm	mm
	(a)	(b)	(c)	(d)	(e)	(f)	(g)
A	42	7	8	20	8	10	12
B	85	12	10	33	11	13	15
C	82	12	13	40	15	17	19
D	78	15	15	40	18	20	22

Type of Instrument	Point length	Shoulder length	Boss length	Aperture length	Aperture width	Bore Width	Outside diameter
	mm	mm	mm	mm	mm	mm	mm
	(a)	(b)	(c)	(d)	(e)	(f)	(g)
A	42	7	8	20	8	10	12
B	85	12	10	33	11	13	15
C	82	12	13	40	15	17	19
D	78	15	15	40	18	20	22

Type of Instrument	Point length	Shoulder length	Boss length	Aperture length	Aperture width	Bore Width	Outside diameter
	mm	mm	mm	mm	mm	mm	mm
	(a)	(b)	(c)	(d)	(e)	(f)	(g)
A	42	7	8	20	8	10	12
B	85	12	10	33	11	13	15
C	82	12	13	40	15	17	19
D	78	15	15	40	18	20	22