# The Sheringham Shoal and Dudgeon Extensions Offshore Wind Farm Order 2024, Paragraph 1: Design parameters

Extent: E+W

Wind turbine generators
(1) Wind turbine generators forming part of the authorised project must not—
(a) exceed a height of 330 metres when measured from HAT to the tip of the vertical blade;
(b) exceed a rotor diameter of 300 metres;
(c) be less than 1.05 kilometres from the nearest wind turbine generator in any direction;
(d) have a distance of less than 30 metres between the lowest point of the rotating blade of the wind turbine generator and HAT;
(e) exceed 23 wind turbine generators in respect of the Sheringham Shoal Extension Project offshore works; or
(f) exceed 30 wind turbine generators in respect of the Dudgeon Extension Project offshore works.
(2) The total rotor-swept area within Work No. 1B must not exceed 1.30 square kilometres.
(3) References to the location of a wind turbine generator are references to the centre point at the base of the wind turbine generator.

---
Source: https://www.legislation.gov.uk/uksi/2024/564/schedule/11/part/2/paragraph/1 (the official version)
Page: https://openlegislation.uk/sheringham-shoal-and-dudgeon-extensions-offshore-wind-farm-order-2024/schedule-11/part-2/paragraph-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.