Regulation 3 Amendment of Schedule 1 to the principal Regulations

“Any occupation involving:

The use of, or work wholly or mainly in the immediate vicinity of the use of, a—

1. (a)

   band saw, circular saw or cutting disc to cut metal in the metal founding or forging industries, circular saw to cut products in the manufacture of steel, powered (other than hand powered) grinding tool on metal (other than sheet metal or plate metal), pneumatic percussive tool on metal, pressurised air arc tool to gouge metal, burner or torch to cut or dress steel based products, skid transfer bank, knock out and shake out grid in a foundry, machine (other than a power press machine) to forge metal including a machine used to drop stamp metal by means of closed or open dies or drop hammers, machine to cut or shape or clean metal nails, or plasma spray gun to spray molten metal;

2. (b)

   pneumatic percussive tool:- to drill rock in a quarry, on stone in a quarry works, underground, for mining coal, for sinking a shaft, or for tunnelling in civil engineering works;

3. (c)

   vibrating metal moulding box in the concrete products industry, or circular saw to cut concrete masonry blocks;

4. (d)

   machine in the manufacture of textiles for:- weaving man-made or natural fibres (including mineral fibres), high speed false twisting of fibres, or the mechanical cleaning of bobbins;

5. (e)

   multi-cutter moulding machine on wood, planing machine on wood, automatic or semi-automatic lathe on wood, multiple cross-cut machine on wood, automatic shaping machine on wood, double-end tenoning machine on wood, vertical spindle moulding machine (including a high speed routing machine) on wood, edge banding machine on wood, bandsawing machine (with a blade width of not less than 75 millimetres) on wood, circular sawing machine on wood including one operated by moving the blade towards the material being cut, or chain saw on wood;

6. (f)

   jet of water (or a mixture of water and abrasive material) at a pressure above 680 bar, or jet channelling process to burn stone in a quarry;

7. (g)

   machine in a ship’s engine room, or gas turbine for:- performance testing on a test bed, installation testing of a replacement engine in an aircraft, or acceptance testing of an Armed Service fixed wing combat aircraft;

8. (h)

   machine in the manufacture of glass containers or hollow ware for:- automatic moulding, automatic blow moulding, or automatic glass pressing and forming;

9. (i)

   spinning machine using compressed air to produce glass wool or mineral wool;

10. (j)

    continuous glass toughening furnace;

11. (k)

    firearm by a police firearms training officer; or

12. (l)

    shot-blaster to carry abrasives in air for cleaning.”.