{
  "url": "https://openlegislation.uk/supply-of-machinery-safety-regulations-2008/regulation-12",
  "json_url": "https://openlegislation.uk/supply-of-machinery-safety-regulations-2008/regulation-12.json",
  "legislation": "uksi/2008/1597",
  "legislation_title": "The Supply of Machinery (Safety) Regulations 2008",
  "legislation_url": "https://openlegislation.uk/supply-of-machinery-safety-regulations-2008",
  "path": "regulation/12",
  "kind": "regulation",
  "number": "12",
  "heading": "Annex IV machinery not manufactured fully in accordance with designated standards or not fully covered by such standards",
  "text": "(1) This regulation applies to machinery—\n(a) which falls within a category which is referred to in Annex IV (Part 4 of Schedule 2); and\n(b) in respect of which any of the following conditions is satisfied—\n(i) that the machinery is not manufactured in accordance with the designated standards which relate to it; or\n(ii) that the machinery is only partly manufactured in accordance with the designated standards which relate to it; or\n(iii) that the designated standards in accordance with which the machinery is manufactured do not cover all the applicable essential health and safety requirements; or\n(iv) that no designated standards exist for the machinery.\n(2) Where this regulation applies, the responsible person shall follow one of the following conformity assessment procedures—\n(a) the Type- examination procedure prescribed in Annex IX (Part 9 of Schedule 2) and the internal checks on the manufacture of machinery prescribed in Annex VIII (Part 8 of Schedule 2), point 3; or\n(b) the full quality assurance procedure prescribed in Annex X (Part 10 of Schedule 2).",
  "extent": "E+W+S",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Word in reg. 12(1)(b)(i)-(iii) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 8(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Word in reg. 12(1)(b)(iv) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 8(b) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Word in reg. 12(2)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 8(c) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F4",
      "text": "Word in reg. 12 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 8(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "E",
      "label": "E1",
      "text": "This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2008/1597/regulation/12",
    "retrieved_at": "2026-10-29T03:29:27.122747+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}