{
  "url": "https://openlegislation.uk/supply-of-machinery-safety-regulations-2008/schedule-2/part-9/paragraph-wrapper8n1",
  "json_url": "https://openlegislation.uk/supply-of-machinery-safety-regulations-2008/schedule-2/part-9/paragraph-wrapper8n1.json",
  "legislation": "uksi/2008/1597",
  "legislation_title": "The Supply of Machinery (Safety) Regulations 2008",
  "legislation_url": "https://openlegislation.uk/supply-of-machinery-safety-regulations-2008",
  "path": "schedule/2/part/9/paragraph/wrapper8n1",
  "kind": "paragraph",
  "number": null,
  "heading": null,
  "text": "EC type- Type- examination is the procedure whereby a notified an approved body ascertains and certifies that a representative model of machinery referred to in Annex IV (Part 4 of this Schedule) (hereafter named the type) satisfies the provisions of the Directive these Regulations.\n1.\nThe responsible person must, for each type, draw up the technical file referred to in Annex VII (Part 7 of this Schedule), part A.\n2.\nFor each type, the application for an EC type- a Type- examination shall be submitted by the responsible person to a notified an approved body chosen by the responsible person.\nThe application shall include:\nthe name and address of the manufacturer and, where appropriate, the manufacturer's authorised representative,\na written declaration that the application has not been submitted to another notified body,\nthe technical file.\nMoreover, the applicant shall place at the disposal of the notified approved body a sample of the type. The notified approved body may ask for further samples if the test programme so requires.\n3.\nThe notified approved body shall:\n3.1.\nexamine the technical file, check that the type was manufactured in accordance with it and establish which elements have been designed in accordance with the relevant provisions of published harmonised standards, and those elements whose design is not based on the relevant provisions of those standards;\n3.2.\ncarry out or have carried out appropriate inspections, measurements and tests to ascertain whether the solutions adopted satisfy the essential health and safety requirements, where published harmonised designated standards were not applied;\n3.3.\nwhere published harmonised designated standards were used, carry out or have carried out appropriate inspections, measurements and tests to verify that those standards were actually applied;\n3.4.\nagree with the applicant as to the place where the check that the type was manufactured in accordance with the examined technical file and the necessary inspections, measurements and tests will be carried out.\n4.\nIf the type satisfies the provisions of the Directive these Regulations, the notified approved body shall issue the applicant with an EC type- a Type- examination certificate. The certificate shall include the name and address of the manufacturer and the manufacturer's authorised representative, the data necessary for identifying the approved type, the conclusions of the examination and the conditions to which its issue may be subject.\nThe manufacturer and the notified approved body shall retain a copy of this certificate, the technical file and all relevant documents for a period of 15 years from the date of issue of the certificate.\n5.\nIf the type does not satisfy the provisions of the Directive, the notified body shall refuse to issue the applicant with an EC type-examination certificate, giving detailed reasons for its refusal. It shall inform the applicant, the other notified bodies and the Member State which notified it. An appeal procedure must be available. If the type does not satisfy the provisions of these Regulations, the approved body shall refuse to issue the applicant with a Type-examination certificate, giving detailed reasons for its refusal. It shall inform the applicant, the other approved bodies and the Secretary of State. An appeal procedure must be available.\n6.\nThe applicant shall inform the notified approved body which retains the technical file relating to the EC type- Type- examination certificate of all modifications to the approved type. The notified approved body shall examine these modifications and shall then either confirm the validity of the existing EC type- Type- examination certificate or issue a new one if the modifications are liable to compromise conformity with the essential health and safety requirements or the intended working conditions of the type.\n7.\nThe Commission, the Member States Secretary of State and the other notified approved bodies may, on request, obtain a copy of the EC type- Type- examination certificates. On reasoned request, the Commission and the Member States Secretary of State may obtain a copy of the technical file and the results of the examinations carried out by the notified approved body.\n8.\nFiles and correspondence referring to the EC type-examination procedures shall be written in the official language(s) of the relevant state where the notified body is established or in any other official Community language acceptable to the notified body. Files and correspondence referring to the Type-examination procedures shall be written in English or any other language acceptable to the approved body.\n9.\nValidity of the EC type- Type- examination certificate\n9.1.\nThe notified approved body has the ongoing responsibility of ensuring that the EC type- Type- examination certificate remains valid. It shall inform the manufacturer of any major changes which would have an implication on the validity of the certificate. The notified approved body shall withdraw certificates which are no longer valid.\n9.2.\nThe manufacturer of the machinery concerned has the ongoing responsibility of ensuring that the said machinery meets the corresponding state of the art.\n9.3.\nThe manufacturer shall request from the notified approved body the review of the validity of the EC type- Type- examination certificate every five years.\nIf the notified body finds that the certificate remains valid, taking into account the state of the art, it shall renew the certificate for a further five years.\nThe manufacturer and the notified body shall retain a copy of this certificate, of the technical file and of all the relevant documents for a period of 15 years from the date of issue of the certificate.\n9.4.\nIn the event that the validity of the EC-type Type- examination certificate is not renewed, the manufacturer shall cease the placing on the market of the machinery concerned.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(3)(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 12 para. 29(3)(aa) (as inserted by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 11(c); 2020 c. 1, Sch. 5 para. 1(1))"
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(3)(b) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F4",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(4)(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F5",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(4)(b) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F6",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(4)(c) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F7",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(5) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F8",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(6) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F9",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(7)(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F10",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(7)(b) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F11",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(7)(c) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F12",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(8) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F13",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(9)(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F14",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(9)(b) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F15",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(10)(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F16",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(10)(c) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F17",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(10)(d) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F18",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(10)(b) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F19",
      "text": "Words in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(11) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F20",
      "text": "Word in Sch. 2 Pt. 9 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 4 para. 7(d)"
    },
    {
      "type": "F",
      "label": "F21",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(12) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F22",
      "text": "Word in Sch. 2 Pt. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 29(13) (with Sch. 12 para. 22) (as amended immediately before exit day by S.I. 2019/1246, regs. 1(3), 11(d) and S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2008/1597/schedule/2/part/9/paragraph/wrapper8n1",
    "retrieved_at": "2026-10-29T03:29:27.122747+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}