# The Town and Country Planning (General Permitted Development) (England) Order 2015, Paragraph B.1: Development not permitted


Development not permitted: block of flats
(1) Development is not permitted by Class B within the curtilage of a block of flats if—
(a) in the case of the installation of stand-alone solar, the development would result in the presence within the curtilage of more than 1 stand-alone solar;
(b) any part of the stand-alone solar—
(i) would exceed 4 metres in height or, in the case of stand-alone solar on land in a conservation area which would be installed so that it is nearer to any highway which bounds the curtilage than the part of the ... or block of flats which is nearest to that highway, 2 metres in height;
(ii) would, in the case of land ... which is a World Heritage Site, be installed so that it is nearer to any highway which bounds the curtilage than the part of the ...or block of flats which is nearest to that highway;
(iii) would be installed within 5 metres of the boundary of the curtilage;
(iv) would be installed within the curtilage of a listed building; or
(v) would be installed on a site designated as a scheduled monument; ...
(c) the surface area of the solar panels forming part of the stand-alone solar would exceed 9 square metres or any dimension of its array (including any housing) would exceed 3 metres ; or
(d) in the case of plug-in solar, any part of the plug-in solar would be installed on a wooden fence, gate, wall or other means of enclosure.
Development not permitted: dwellinghouse
(2) Development is not permitted by Class B within the curtilage of a dwellinghouse if—
(a) the height of any part of the stand-alone solar when measured from the surface of the ground would, after the carrying out of the development, exceed the lowest applicable height limit in the table—
Circumstances where limit applies
Height limit
(i)
Any part of the stand-alone solar would be installed—
(aa)within 5 metres of the boundary of the curtilage; and
(bb)so that it is situated on land forward of a wall forming part of the principal elevation of the dwellinghouse.
1 metre.
(ii)
Any part of the stand-alone solar would be installed within 5 metres of the boundary of the curtilage.
2 metres.
(iii)
Any part of the stand-alone solar would be installed—
(aa)on land in a conservation area; and
(bb)so that it is nearer to any highway which bounds the curtilage than the part of the dwellinghouse which is nearest to that highway.
2 metres.
(iv)
In any other case.
4 metres.
(b) any part of the stand-alone solar—
(i) would, in the case of land which is a World Heritage Site—
(aa) be installed so that it is nearer to any highway which bounds the curtilage than the part of the dwellinghouse which is nearest to that highway; or
(bb) be installed within 5 metres of the boundary of the curtilage;
(ii) would be installed within the curtilage of a listed building; or
(iii) would be installed on a site designated as a scheduled monument;
(c) the surface area of the solar panels forming part of the stand-alone solar would exceed 9 square metres; or
(d) in the case of plug-in solar, any part of the plug-in solar would be installed on a wooden fence, gate, wall or other means of enclosure.

---
Source: https://www.legislation.gov.uk/uksi/2015/596/schedule/2/part/14/crossheading/class-b-installation-or-alteration-etc-of-standalone-solar-equipment-on-domestic-premises/paragraph/B.1 (the official version)
Page: https://openlegislation.uk/town-and-country-planning-general-permitted-development-england-order-2015/schedule-2/part-14/crossheading-class-b-installation-or-alteration-etc-of-standalone-solar-equipment-on-domestic-premises/paragraph-B.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

