# The Traffic Signs Regulations and General Directions 2016, Paragraph 5

Extent: E+W+S

Information about the ownership of a cone, cylinder or delineator may—
(a) in the case of a cone, be moulded—
(i) into the base in characters not more than 80 mm high in the same colour as the base;
(ii) into the conical body in characters not more than 40 mm high in the same colour as that body; or
(iii) as mentioned in both paragraphs (i) and (ii);
(b) in the case of a cylinder, be moulded into the lower of the two red parts of the cylinder in red characters not more than 40 mm high; and
(c) in the case of a delineator, be moulded into the base in characters not more than 80 mm high and in the same colour as the base.

---
Source: https://www.legislation.gov.uk/uksi/2016/362/schedule/13/part/8/paragraph/5 (the official version)
Page: https://openlegislation.uk/traffic-signs-regulations-and-general-directions-2016/schedule-13/part-8/paragraph-5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.