# The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2012, Schedule 2: VOC content limit values

Extent: E+W+S+NI

A. Maximum VOC content limit values for paints and varnishes
Product Subcategory
Type
VOC (g/l)
(1)“solvent-borne coatings (SB)” means coatings the viscosity of which is adjusted by the use of organic solvent; and
“water-borne coatings (WB)” means coatings the viscosity of which is adjusted by the use of water;
(2)g/l of ready to use product.
a
Interior matt walls and ceilings (Gloss ≤25@60°)
WB
30
SB
30
b
Interior glossy walls and ceilings (Gloss >25@60°)
WB
100
SB
100
c
Exterior walls of mineral substrate
WB
40
SB
430
d
Interior/exterior trim and cladding paints for wood and metal
WB
130
SB
300
e
Interior/exterior trim varnishes and woodstains, including opaque woodstains
WB
130
SB
400
f
Interior and exterior minimal build woodstains
WB
130
SB
700
g
Primers
WB
30
SB
350
h
Binding primers
WB
30
SB
750
i
One-pack performance coatings
WB
140
SB
500
j
Two-pack reactive performance coatings for specific end use such as floors
WB
140
SB
500
k
Multi-coloured coatings
WB
100
SB
100
l
Decorative effect coatings
WB
200
SB
200
B. Maximum VOC content limit values for vehicle refinishing products
Product sub-category
Coatings
VOC g/l
(1)g/l of ready to use product. Except for sub-category (a) any water content of the ready to use product should be discounted.
a
Preparatory and cleaning
Preparatory
850
Pre-cleaner
200
b
Bodyfiller/stopper
All types
250
c
Primer
Surface /filler and general (metal) primer
540
Wash primer
780
d
Topcoat
All types
420
e
Special finishes
All types
840

---
Source: https://www.legislation.gov.uk/uksi/2012/1715/schedule/2 (the official version)
Page: https://openlegislation.uk/volatile-organic-compounds-in-paints-varnishes-and-vehicle-refinishing-products-regulations-2012/schedule-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

