# The Water Supply (Water Quality) Regulations 2000, Schedule 1: PRESCRIBED CONCENTRATIONS AND VALUES


TABLE A
MICROBIOLOGICAL PARAMETERS
Part I: Directive requirements Item
Parameters
Concentration or Value maximum)
Units of Measurement
Point of compliance
1.
Enterococci
0
number/100ml
Consumers' taps
2.
Escherichia coli (E. coli)
0
number/100ml
Consumers' taps
Part II: National requirements Item
Parameters
Concentration or Value maximum)
Units of Measurement
Point of compliance
Note: *Compliance required as to 95% of samples from each service reservoir (regulation 4(6)).
1.
Coliform bacteria
0
number/100ml
Service reservoirs and water treatment works
2.
Escherichia coli (E. coli)
0
number/100ml
Service reservoirs and water treatment works
TABLE B
CHEMICAL PARAMETERS
Part I: Directive requirements Item
Parameters
Concentration or Value maximum)
Units of Measurement
Point of compliance
Notes: (i)The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. This is controlled by product specification.
(ii)See also regulation 6(6).
(iii)See also regulation 4(2)(d).
(iv)See the definition of “pesticides and related products” in regulation 2.
(v)The parametric value applies to each individual pesticide.
(vi)“Pesticides: Total” means the sum of the concentrations of the individual pesticides detected and quantified in the monitoring procedure.
(vii)The specified compounds are:
benzo(b)fluoranthene
benzo(k)fluoranthene
benzo(ghi)perylene
indeno(1,2,3-cd)pyrene.
The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process.
(viii)The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process.
(ix)The specified compounds are:
chloroform
bromoform
dibromochloromethane
bromodichloromethane.
The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process.
1.
Acrylamide
0.10
μg/l
2.
Antimony
5.0
μgSb/l
Consumers' taps
3.
Arsenic
10
μgAs/l
Consumers' taps
4.
Benzene
1.0
μg/l
Consumers' taps
5.
Benzo(a)pyrene
0.010
μg/l
Consumers' taps
6.
Boron
1.0
mgB/l
Consumers' taps
7.
Bromate
10
μgBrO3/l
Consumers' taps
8.
Cadmium
5.0
μgCd/l
Consumers' taps
9.
Chromium
50
μgCr/l
Consumers' taps
10.
Copper
2.0
mgCu/l
Consumers' taps
11.
Cyanide
50
μgCN/l
Consumers' taps
12.
1, 2 dichloroethane
3.0
μg/l
Consumers' taps
13.
Epichlorohydrin
0.10
μg/l
14.
Fluoride
1.5
mgF/l
Consumers' taps
15.
Lead
(a) 25, from 25th December 2003 until immediately before 25th December 2013
μgPb/l
Consumers' taps
(b) 10, on and after 25th December 2013
μgPb/l
Consumers' taps
16.
Mercury
1.0
μgHg/l
Consumers' taps
17.
Nickel
20
μgNi/l
Consumers' taps
18.
Nitrate
50
mgNO3/l
Consumers' taps
19.
Nitrite
0.50
mgNO2/l
Consumers' taps
0.10
Treatment works
20.
Pesticides
Aldrin
0.030
μg/l
Consumers' taps
Dieldrin
Heptachlor
Heptachlor epoxide
other pesticides
0.10
μg/l
Consumers' taps
21.
Pesticides: Total
0.50
μg/l
Consumers' taps
22.
Polycyclic aromatic hydrocarbons
0.10
μg/l
Consumers' taps
23.
Selenium
10
μgSe/l
Consumers' taps
24.
Tetrachloroethene and Trichloroethene
10
μg/l
Consumers' taps
25.
Trihalomethanes: Total
100
μg/l
Consumers' taps
26.
Vinyl chloride
0.50
μg/l
Part II: National requirements Item
Parameters
Concentration or Value (maximum unless otherwise stated)
Units of Measurement
Point of compliance
1.
Aluminium
200
μgAl/l
Consumers' taps
2.
Colour
20
mg/l Pt/Co
Consumers' taps
3.
Hydrogen ion
10.0
pH value
Consumers' taps
6.5 (minimum)
pH value
4.
Iron
200
μgFe/l
Consumers' taps
5.
Manganese
50
μgMn/l
Consumers' taps
6.
Odour
3 at 25°C
Dilution number
Consumers' taps
7.
Sodium
200
mgNa/l
Consumers' taps
8.
Taste
3 at 25°C
Dilution number
Consumers' taps
9.
Tetrachloromethane
3
μg/l
Consumers' taps
10.
Turbidity
4
NTU
Consumers' taps

---
Source: https://www.legislation.gov.uk/uksi/2000/3184/schedule/1 (the official version)
Page: https://openlegislation.uk/water-supply-water-quality-regulations-2000/schedule-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

