# The Weighing Equipment (Automatic Gravimetric Filling Instruments) Regulations (Northern Ireland) 2005, Regulation 15


An inspector may obliterate the stamp on any filling instrument which –
(a) has, since it was last stamped, been the subject of any adjustment, alteration, addition, repair or replacement –
(i) which could, in the opinion of the inspector, have affected its accuracy or function; and
(ii) where the chief inspector has been furnished in writing with details of that adjustment, alteration, addition, repair or replacement;
(b) is in use for trade for a particular purpose and –
(i) which does not meet the requirements of Schedule 2 in respect of minimum or maximum capacity; or
(ii) for which purpose, in the opinion of the inspector, it is otherwise unsuitable; or
(c) is in use for trade in circumstances where the filling instrument is subjected to any extraordinary environmental or operating conditions which, in the opinion of the inspector, –
(i) prevent the filling instrument operating consistently and correctly; or
(ii) are likely prematurely to degrade the metrological characteristics of the filling instrument.

---
Source: https://www.legislation.gov.uk/nisr/2005/27/regulation/15 (the official version)
Page: https://openlegislation.uk/weighing-equipment-automatic-gravimetric-filling-instruments-regulations-northern-ireland-2005/regulation-15
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

