# The Weighing Equipment (Beltweighers) Regulations 2001, Regulation 15: Passing as fit for use for trade

Extent: E+W+S

(1) Save in a case where paragraph (2) has effect, no beltweigher shall be passed as fit for use for trade unless—
(a) it complies with all the appropriate requirements of these Regulations;
(b) on testing, it falls within the relevant maximum permissible error in relation to initial verification;
(c) on testing, it satisfies the requirements in relation to initial verification of clauses 5.2.1.1 and 5.2.1.2 of, and clause A.11 of Annex A to, R 50–1; and
(d) in the case of an electronic beltweigher, switch-on tests carried out in conformity with clause 4.4 of R 50–1 show that all relevant signs of the indicating devices are operating satisfactorily.
(2) In the case of a beltweigher imported from an EEA State, no beltweigher shall be passed as fit for use for trade unless—
(a) where the requisite documentation is presented in accordance with regulation 14, the test report recites and the test data confirm to the satisfaction of the inspector that on testing in the relevant State it fell within the relevant maximum permissible error; and
(b) it complies with all the relevant requirements of these Regulations.

---
Source: https://www.legislation.gov.uk/uksi/2001/1208/regulation/15 (the official version)
Page: https://openlegislation.uk/weighing-equipment-beltweighers-regulations-2001/regulation-15
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.