# The Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) (Amendment) Regulations 1996, Regulation 10: Amendment


The principal Regulations are hereby further amended, in regulation 34, by the addition at the beginning of the words “(1) Subject to paragraph (2) below,” and by the addition at the end of the following paragraph—
“(2) A discontinuous totaliser imported from another member State or from an EEA State shall not be passed as fit for use for trade unless—
(a) where the requisite documentation is presented in accordance with regulation 32A above, the test report recites and the test data confirm to the satisfaction of the inspector that on testing in accordance with the provisions of the law of a member State or an EEA State it fell within limits of error which afford in use an equivalent standard to the prescribed limits of error; and
(b) it otherwise complies with all the relevant requirements of these Regulations; and
(c) the inspector is of the opinion that it is not constructed in a manner which facilitates fraudulent use and that it does not bear any inscriptions which might cause confusion in use.”.

---
Source: https://www.legislation.gov.uk/uksi/1996/797/regulation/10 (the official version)
Page: https://openlegislation.uk/weighing-equipment-filling-and-discontinuous-totalising-automatic-weighing-machines-amendment-regulations-1996/regulation-10
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

