# The Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) (Amendment) Regulations 1996, Regulation 7: Amendment


The principal Regulations are hereby further amended, in regulation 31,—
(a) by the substitution for paragraph (1) of the following paragraph—
“31 (1) No discontinuous totaliser shall be tested, passed as fit for use for trade and stamped unless either—
(a) it has been completely erected ready for use and installed at the place where it is to be used, or
(b) it has been completely erected ready for use in conditions which are in all material respects the same as those at the place where it is to be used and it is not to be dismantled before it is installed at that place.”; and
(b) by the substitution in paragraph (3) for the words “such material” to the end of the paragraph of the words “a non-automatic weighing machine which meets the requirements of paragraph 5 in Part II of Schedule 2 to these Regulations and such material as the inspector may reasonably require; and any such machine and material so provided shall be returned to the person in question”.

---
Source: https://www.legislation.gov.uk/uksi/1996/797/regulation/7 (the official version)
Page: https://openlegislation.uk/weighing-equipment-filling-and-discontinuous-totalising-automatic-weighing-machines-amendment-regulations-1996/regulation-7
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

