OpenLegislation

Paragraph 3

Original text. Later amendments are not shown.

(1)

Every filling machine shall be subjected to the following test (hereinafter referred to as “test A”), that is to say, the inspector shall—

(a)

select 20 separate consecutive test loads;

(b)

determine the weight of the material in each test load using the arrangements referred to in paragraph 2;

(c)

ascertain the difference between the weight of the material determined in accordance with head (b) and the value for that weight indicated on the machine (hereinafter referred to as the “purported weight”).

(2)

The difference referred to in sub-paragraph (1)(c) shall constitute the error for the purposes of test A in calculating the prescribed limits of error in excess set out in columns 3 and 5 of Table 1 in Schedule 3 in relation to the description of machine set out in column 1 other than filling machines for use only for weighing potato crisps and other similar products commonly known as snack foods.

(3)

The total of the differences referred to in sub-paragraph (1)(c) in relation to each test load shall constitute the error for the purposes of test A in calculating the prescribed limits of error in excess set out in columns 3 and 5 of Table 1 in Schedule 3 in relation to filling machines for use only for weighing potato crisps and other similar products commonly known as snack foods.

(4)

Where a filling machine is constructed to feed and weigh material of more than one purported weight, the inspector shall select two groups of 20 separate consecutive test loads, one group of test loads each made up as nearly as practicable equal to the minimum load and one other group.