Paragraph 6
With the load receptor of the discontinuous totaliser empty, the inspector shall ensure that—
the totalisation indicating device is set to zero; and
any individual weight indicating device is set to zero or a given point.
A minimum of two individual tests, each consisting of 20 separate loads, shall then be carried out on the machine under normal conditions of use in accordance with sub-paragraph (3).
At least two of the individual tests referred to in sub-paragraph (2) shall consist of tests involving the weighing on the machine of approximately the same quantity of suitable material, at least equal to the minimum totalised load marked on the machine.
Where the quantity of material weighed by the machine can vary, each individual test referred to in sub-paragraph (2) shall be made with a quantity of suitable material as nearly as practicable equal to the minimum totalised load and another individual test consisting of 20 separate loads with a quantity of suitable material as nearly as practicable equal to the maximum capacity shall then be carried out on the machine.
For each of the tests carried out in accordance with sub-paragraphs (2), (3) and (4), the inspector shall determine:—
the weight of material used in the test using the arrangements referred to in paragraph 5;
the material testing error by ascertaining the difference between the weight of the material determined in accordance with head (a) and the value for that weight of the material obtained from the totalisation indicating device.
Subject to sub-paragraph (7), the inspector shall determine the repeatability error for each of the tests carried out in accordance with sub-paragraph (3), being the difference between the material testing errors determined in accordance with sub-paragraph (5).
Before 1st January 1988, the inspector shall not carry out his duty specified in sub-paragraph (6) in respect of any discontinuous totaliser which is made in accordance with a pattern in respect of which a certificate of approval was in force before the date of coming into operation of these Regulations.