# The Weighing Equipment (Filling and Discontinuous Totalisting Automatic Weighing Machines) Regulations 1986, Regulation 31

Extent: E+W+S

(1) No discontinuous totaliser shall be tested, passed as fit for use for trade and stamped unless either—
(a) it has been completely erected ready for use and installed at the place where it is to be used, or
(b) it has been completely erected ready for use in conditions which are in all material respects the same as those at the place where it is to be used and it is not to be dismantled before it is installed at that place.
(2) Every discontinuous totaliser submitted for testing shall be in a clean condition.
(3) For the purposes of the performance by an inspector of his functions under the Act or these Regulations relating to inspection, testing, passing as fit for use for trade and stamping of any discontinuous totaliser, a person submitting such a machine to an inspector or who an inspector has reasonable cause to believe has control of such a machine for use for trade shall, if requested, provide for the inspector's use a non-automatic weighing machine which meets the requirements of paragraph 5 in Part I of Schedule 2 to these Regulations and such material as the inspector may reasonably require; and any such machine and material so provided shall be returned to the person in question.

---
Source: https://www.legislation.gov.uk/uksi/1986/1320/regulation/31 (the official version)
Page: https://openlegislation.uk/weighing-equipment-filling-and-discontinuous-totalisting-automatic-weighing-machines-regulations-1986/regulation-31
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

