OpenLegislation

Regulation 38 Stamping

Original text. Later amendments are not shown.

(1)

The stamp shall be placed on the plug, stud or plate and on every sealing device referred to in Regulation 20 above.

(2)

No non-automatic weighing machine shall be stamped in accordance with paragraph (1) above if it bears any mark which, in the opinion of the inspector, might reasonably be mistaken for the stamp, or any statement or mark (other than an inspector’s stamp) which purports to be or, in the opinion of the inspector, might reasonably be mistaken for an expression of approval or guarantee of accuracy by any body or person.